Bissell POWERCLEAN MAX 3112F Manual 

What’s in the Box?......................................................................3 Assembly........................................................................................3 Cleaning Formulas.....................................................................4 Filling the Clean Water Tank..................................................5 Cleaning Carpets and Area Rugs.........................................6 Cleaning with the Hose and Tool.........................................7 Emptying the Dirty Water Tank...........................................8 Aft ...

Risk of fire. Risk of electric shock. For indoor use only. Do not overwet carpet. Use only on carpet moistened by the cleaning process. Use only BISSELL® cleaning formulas intended for use with this machine. Disconnect power before servicing. SYMBOL EXPLANATION Protection against moving parts. Risk of automatic start-up. Use warm water, temperature up to 60°C. Check the manufacturer’s tag before cleaning textile. “W” on the tag as shown means you can use your cleaner. Lock. This symbol on the product and/or accompanying documents means that used electrical and electron ...

Tank Clean Water Tank (2) BISSELL® Trial-Size Formulas Accessory Bag & Hose 3” Tough Stain Tool 2-in-1 Crevice Tool What’s in the Box? Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap. 1. Upper Handle 2. Spray Trigger 3. Clean Water Tank 4. Carry Handle 5. Dirty Water Tank 6. Accessory Hose Door Product View For additional support videos and information, visit global.BISSELL.com. 1 3 2 4 5 6 ...

Keep plenty of BISSELL® formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL formulas in your machine. Other formulas may harm the machine and void the warranty. Do not use Wash & Shine Hard Floor Formula on area rugs or carpet. WARNING To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL formula intended for use with this machine. Use of cleaning formulas that contain eucalyptus, lemon or pine oil may damage this appliance and void the warranty. Chemical spot cleaners or solvent-based soil re ...

More of a video person? Head to global.BISSELL.com for helpful how-to videos. Note: Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. Do not use boiling water. Do not heat water or tank in microwave. 1. The clean water tank is on the top of the machine. 2. Lift the tank straight up to remove. 3. Unscrew the yellow cap from the tank. 4. Fill the tank with water and formula. Cleaning Formula Fill with hot tap water and formula to the WATER and FORMULA fill lines above the DEEP CLEAN or EXPRESS CLEAN labels. Trial-Size ANTIBACTERIAL Formula Fill with hot tap water an ...

Visit global.BISSELL.com for helpful how-to carpet cleaning videos. Tips Before Cleaning • Use a dry vacuum cleaner over area before using your deep cleaner. • To prevent damage to Berber carpets, avoid repeated strokes in the same area. • Before cleaning area rugs, check the manufacturer’s tag and test an inconspicuous spot on the rug for colorfastness. Don’t use on silk or delicate rugs. • It is common to refill the clean water tank and empty the dirty water tank multiple times during cleaning. Room size and cleaning speed both affect how often the tank may need to be refilled and ...

Visit global.BISSELL.com for helpful tips for using tools. Tips Before Cleaning • Check for colorfastness in an inconspicuous place before cleaning larger area. • If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet. • Vacuum thoroughly to pick up loose debris and pet hair. • Check manufacturer’s tag before cleaning. Do not use on velvet or silk. • The brush roll remains on while cleaning with the hose and tool. Do not allow cleaner to sit in one location for an extended period of time, as damage to floor can result. 1. Lift the accessory hose ...

For helpful how-to videos about maintaining your machine visit global.BISSELL.com. 1. Pull dirty water tank up and away to remove. 2. For quick empty: Pull the rubber tab (located in the middle of the tank) and tilt to pour. When closing the rubber tab, make sure all edges are sealed tight. 3. For final clean and rinse: Unscrew the ring at the bottom of tank. Gently remove the float stack, rinse and return to the tank lining up the arrows locking into place. Return the ring and twist to lock. 4. Clean the red filter below the dirty water tank by wiping off any remaining dirt or debris. 5. To replace ...

Cleaning the Nozzle 1. Turn OFF and unplug the machine. 2. Remove the nozzle from the foot by lifting up on the back of the accessory hose door to open. 3. Rinse under warm water to remove hair and debris. 4. Return the nozzle to the foot of the machine. Line up the two hooks on the nozzle to the bottom of the foot. 5. Rotate the nozzle down and click into place. 6. Close the accessory hose door. Cleaning the Brush Roll 1. Turn OFF and unplug the machine. 2. Lay the machine down on its back or side. 3. Remove debris or hair from the brush rolls ...

electrical outlet before performing maintenance or troubleshooting. Replacing the Belts and Brush Rolls For replacement parts, head to global.BISSELL.com. 1. Unplug the machine. Remove both tanks. With the machine reclined, locate the belt access cover and lay the machine on its side. 2. Remove the 3 screws on the brush access cover using a Phillips-head screwdriver. Remove the access cover to expose the cogged belt and brush roll. 3. Remove the 2 screws on the belt access cover using a Phillips-head screwdriver. Remove the ac ...

empty. Refill tank. Clean water tank may not be seated completely. Turn power OFF. Remove and reseat tank. Pump may have lost prime in hose cleaning mode. Hold end of hose below water level in tank to prime. No spray through hose & tool The hose to your machine is not primed. With the machine OFF and unplugged, remove the nozzle from the foot. Place a ballpoint pen in the black cylinder next to the screw. When water bubbles up, remove the pen. Reassemble the nozzle and hose. Loss of suction power Tanks may not be seated properly. Pick up both tanks ...

in addition to rights you may have under the Australian Consumer Law. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact your local BISSELL® Consumer Care on the details set out below. It may be necessary to obtain some of your personal information, such as a mailing address, to fulfill terms of this warranty. Any personal data will be handled pursuant to BISSELL’s Privacy Policy, which can be found at global.BISSELL.com/privacy-policy. BISSELL® Three-Year Warranty Subject to the *conditions identified below, BISSELL will re ...