Birlea URBB4RUS Assembly Instructions
Text of Birlea URBB4RUS Assembly Instructions
120CM URBAN BED
IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR 120CM URBAN BED.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber inside the accessories pack.
HEALTH & SAFETY:
DO NOT use this product if any parts
Page of 4
Vendor: S000350
Parts List
Hardware List ( BOX 2 )
Part
Descripion
Qty Part
Description
Qty
** You will need a screwdriver for
assembly.
01
1
Headboard panel
02
03
04
05
06
07
Tailstock panel
Center slat
Slat support
1
1
1
1
1 Set
2
Bed side panel ( Left )
Bed side panel ( Right )
Bed slat
JCBC Screw M6 x 60mm
JRN Nut
B
C
D
E
F
G
H
M6 x 50mm CSK Cap Wood screw
M3.5 x 16mm C.B Screw
8
8
1
4
16
2
Allen key M4
2
M4 x 38mm C.B Screw
9
A
Bracket
Page of 4 Vendor: S000350
Step 2: Fix bed side panel (3) and (4) to headboard panel (1) and tailstock panel (2) using hardware part
A, B and C.
Please note that do not fully tighten the hardware A before assembling center slat (5).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 2: Attach center slat (5) to slat support (6) using hardware C and F.
Please note that s
Page of 4 Vendor: S000350
Step 3: Attach hardware G at center slat (5) to hardware H at headboard panel (1) and tailstock panel (2) using
hardware D with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Attach bed slat (7) to bed side panel (3), (4) and center slat (5) using hardware E with a
screwdriver (not provided).
DO NOT use any power too