Biostar B365MHC Manual
Text of the manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, i
2 | Table Of Contents
Table Of Contents
FCC Information and Copyright............................................................................... 1
Chapter 1: Introduction........................................................................................... 3
1.1 Before You Start�����������������������
Chapter 1: Introduction | 3
B365MHC
Chapter 1: Introduction
1.1 Before You Start
Thank you for choosing our product. Before you start installing the motherboard, please make
sure you follow the instructions below:
• Prepare a dry and stable working environment with sufficient lighting.
• Always disconnect the computer from power outlet before ope
4 | Chapter 1: Introduction
1.3 Specifications
Specifications
CPU Support
Socket 1151 for 9th / 8th Gen Intel® Core, Pentium and Celeron processors
Maximum CPU TDP (Thermal Design Power): 95Watt
* 9th / 8th Generation Intel® Core™ Processor Family only support 300-Series.
* Please refer to www.biostar.com.tw for CPU support list.
Chipset
INTEL® B365
Mem
Chapter 1: Introduction | 5
B365MHC
1.4 Rear Panel Connectors
Note
» HDMI / VGA ports only work with an Intel® integrated Graphics Processor.
»
» Maximum resolution
HDMI: 4096 x 2160 @24Hz, compliant with HDMI 1.4
VGA: 1920 x 1200 @60Hz
»
» When using the front HD audio jack and plug in the headset, the rear sound will be automatically
Disabled.
»
Chapter 2: Hardware installation | 7
B365MHC
Chapter 2: Hardware installation
2.1 Install Central Processing Unit (CPU)
Step 1: Locate the CPU socket on the motherboard
Note
» Remove pin cap before installation, and make good preservation for future use. When the CPU is
removed, cover the pin cap on the empty socket to ensure pin legs won’t be damaged.
8 | Chapter 2: Hardware installation
Step 4: Hold processor with your thumb and index fingers, oriented as shown. Align the
notches with the socket. Lower the processor straight down without tilting or sliding the
processor in the socket.
Step 5: Hold the CPU down firmly, and then lower the lever to locked position to complete the
installation.
Note
» En
Chapter 2: Hardware installation | 9
B365MHC
2.2 Install a Heatsink
Step 1: Place the CPU fan assembly on top of the installed CPU and make sure that the four
fasteners match the motherboard holes. Orient the assembly and make the fan cable is closest
to the CPU fan connector.
Step 2: Press down two fasteners at one time in a diagonal sequence to secure the
10 | Chapter 2: Hardware installation
2.3 Connect Cooling Fans
These fan headers support cooling-fans built in the computer. The fan cable and connector
may be different according to the fan manufacturer.
CPU_FAN1: CPU Fan Header
Pin
Assignment
1
Ground
2
+12V
3
FAN RPM rate sense
4
Smart Fan Control (By Fan)
SYS_FAN1: System Fan Header
Pin
Assignment
1
Grou