BiOptic Qsep1-Plus Operation Quick Start

Bio-Fragment Analyzer: Qsep1-Plus Document No.: F0081 Ver.: ENG-A Page: 1/3 1. Ensure the SD card is properly inserted in the socket (Fig. 1 and 2). 3. Plug the power cord (labeled Qsep1-Plus) *SD card needs to be inserted before powering on. The SD card CANNOT be initialized with hot plugging. 4. Switch on Qsep1-Plus, the LED lights up ...

12-well sample tray Operation Quick Start 6. Double click the icon of Q-Analyzer. 7. Q-Analyzer user interface: Cartridges Alignment Maker Separation Buffer Dilution Buffer Mineral Oil Buffer Tray Dropper 0.2 ml tubes Bio-Fragment Analyzer: Qsep1-Plus Document No.: F0081 Ver.: ENG-A Page: 2/3 Packing List of Cartridge Kit (Cat. C105200) 5. ...

15-3. Click on “Result Name” and enter the name of result files. 14. Cartridge Calibration: New cartridge need to be calibrated before use. Please follow the steps below to proceed. 14-1. Click “HV Check”. 14-2. Click “Calibrate”. * The storage and transportation condition may influence the Gel- matrix and cause unstable cu ...