Yamaha DV-C6660 Owner's Manual

PROGRESSIVE REPEAT DVD CHANGER LECTEUR DE DVD CHANGEUR DV-C6660 OWNER’S MANUAL MODE D’EMPLOI UA ...

within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING To reduce the risk of fire or electri ...

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to ...

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, or cold. In a cabinet, allow about 2.5cm (1 inch) of free space all around this unit for adequate ventilation. 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 4 Do not expose this unit to sudden temperature changes from cold to hot, nor locate this unit in an environment with high humidity (i.e., a ...

Cleaning discs..........................................................................2 Symbols Used in this Manual...................................2 Functional Overview Front Panel ..................................................................3 Rear Panel....................................................................4 Remote Control.........................................................5 Preparation General Notes on connections ..............................6 Digital Con ...

player. This Owner’s Manual explains the basic operation of this DVD player. Supplied accessories – Remote control – Batteries (two AA size) for remote control – Audio/Video cable – Owner’s Manual Notes about discs – This unit is designed for use with DVD video, Video CD, Super video CD, Audio CD (CD text supported), CD-R and CD-RW (MP3 Supported), DVD+RW and DVD+R. – CD-R and CD-RW cannot be played unless finalized. – Some discs cannot be played depending on the disc characteristics or recording conditions. – Be sure to use only CD-R and CD-RW discs made by reliable manufacturers. – ...

DISC (1, 2, 3, 4, 5)/LEDs preferred disc / each LED flashes green when button is selected LEDs – LED lights up when the cor to select and directly playback the – responding feature is set to ON chapter or track R/T – search forward* / go to the next chapter or track B; PLAY/PAUSE – to start or interrupt playback 9 STOP – to stop playback PLAYXCHANGE – to change another disc(s) during playback STANDBY ON DISC 2 3 5 4 1 PLAY CHANGE NATURAL SOUND DVD PLAYER PROGRESSIVE REPEAT STANDBY/ON – to switch the player to standby mode or ON Disc Tray – load up to 5 discs on the disc tray / ...

Electrostatic discharge may cause permanent damage to the player. VIDEO OUT DIGITAL OUT AUDIO OUT S VIDEO PCM DTS DIGITAL COAXIAL OPTICAL R SUB WOOFER COMPONENT SCAN MODE VIDEO PR PB Y 1 2 480p 480i SUBWOOFER AUDIO OUT – connect to AUDIO inputs of your AV receiver or stereo system Progressive / Interlace SELECTOR (NTSC only) – to switch between Progressive or interlace depending on your monitor AC Power Cord – connect to a standard AC outlet VIDEO OUT - S VIDEO DIGITAL OUT - OPTICAL DIGITAL OUT - COAXIAL – connect to an active subwoofer – connect to COAXIAL inpu ...

DISC SKIP SOUND MODE T C DIMMER 2 3 1 5 4 6 8 7 9 0 RETURN RESUME CD TEXT BIT RATE MENU ON SCREEN ENTER OK STOP PAUSE PLAY ANGLE ZOOM AUDIO SUBTITLE A B SCAN REPEAT SHUFFLE DISC SKIP – to select another disc DIMMER – to select 4 different brightnesses for the display T/C – select title/chapter SOUND MODE – selects required sound mode Stereo, Dolby Surround- compatible or 3D sound RETURN/RESUME – go back to previous menu / continue playback after play was stopped MENU – access menu of a DVD disc 1, 2, 3, 4 – (left/right/up/down) select an item in the menu ENTER/OK – ...

Never make or change connections with the power switched on. ● Depending on the equipment you wish to connect, there are various ways you could connect this player. Possible connections are shown in the following drawings. ● Please refer to the manuals of other equipment as necessary to make the best connections. ● Do not connect this player via your VCR. The video quality could be distorted by the copy protection system. ● Do not connect this player’s audio out jack to the phono in jack of your audio system. Digital Connections This player has COAXIAL and OPTICAL digital out jacks. Connect one or both of them t ...

S (separate) video connection achieves a clearer picture than composite video connection by separating color and luminance when transmitting signals. Use commercially available S-video cable. Receiver (and TV) with S-video input is required. Component Video jacks Component video connection achieves high fidelity in reproducing colors (better performance than S-video connection), separating video signal into luminance (Y, terminal color-coded as green), and color difference (Pb, blue/Pr, red). SCAN MODE selector This switch will change the type of NTSC signal output from the Pr/Cr Pb/Cb Y VIDEO OUT on the player. 480p: Se ...