Digitus DS-55303 Manual 

Manual DS-55303 The Digitus HDMI Extender Splitter Set, 1x4 offers an extender and splitter solution of up to 40 m for the highest demands. It is used to transmit digital video and audio signals to a maximum length of up to 40 m and to distribute them to up to four monitors/screens. The highest supported video resolution is 10 ...

1. Do not mix up the Transmitter and Receiver, and the IR blaster and IR receiver. 2. Do not plug-in/out the cables, when it is in using. 3. Use DC 5V power supply only. Make sure the specification matched if using 3rd party DC adapters. 4. Support power from transmitter to receiver unit over the CAT6 cable. Package Contents Tra ...

Output RJ45×4 Transmission distance 40 meters via CAT6 Video support 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz Audio format PCM DTS AC3 TMDS signal 0.5~1.5Vp-p (TMDS) DDC signal 5Vp-p (TTL) IR pass-back function Support IR frequency ...

① Power input (DC5V) ② EDID dip switch ③ IR signal output to connect with blaster extension cable ④ HDMI input ⑤ HDMI output ⑥ RJ45 signal output ⑦ Power/signal indicator ⑧ Reset button Receiver unit (RX) ...

② RJ45 signal input ③ RJ45 indicator led it lights on all the time with HDMI signal transmission, flashes with no signal transmission ④ DC5V power input (OPTIONAL) ⑤ HDMI signal output ⑥ IR signal input to connect with IR receiver extension cable Remarks: The LENGTH key is designed for switch ...

same time, which to avoid interference. 3. Connection instruction: 1) Connect the HDMI signal source device to the Transmitter HDMI input port with HDMI cable. 2) Connect IR blaster to EXTENDER IR OUT 3) Connect the Transmitter RJ45 port to HDMI EXTENDER RX's Rj45 input port ...

display's HDMI input port by HDMI cable and set the HDMI display's signal source to be HDMI port. 5) Supply the power (Power's signal light is red, when there are signal input then the power light is blue), the product will work. 4. EDID Setting 1) HDMI source device reads the EDID information of the tra ...

A: 1) Please check whether display on standby mode; 2) Please check whether display HDMI signal channel in accord with HDMI input port 3) Please check whether “LINK” LED on RX side keeps on, LED flash means RX does not receive signal from TX. 4) Please check whether signal indicator LED on TX turns blue, LED on ...

manufacturers.TM and ® may be omitted on the user manual. The pictures on the user manual are just for reference, and there may be some slight difference with the real products. We reserve the rights to make changes without further notice to a product or system described herei ...