Airzone ZBS Quick Installation Manual

English Français MESCA does not support supplemental duct based heating element use in combination with Airzone product applications MESCA n’offrira aucune assistance technique pour tout ajout d’éléments électriques chauffants dans les conduits autre que Mitsubishi Électrique pour des installations avec des produits Airzone ...

Precautions ......................................................................................................... ...

PRECAUTIONS For your security, and to protect the devices, follow these instructions:  Do not manipulate the system with wet or damp hands.  Disconnect the power supply before making any connections.  Take care not to cause a short circuit in any of the system connections. ENVIRONMENTAL POLIC ...

mode and fan speed of the system. - Blueface Main: Mode, User mode icons shown in white color. - Blueface Zone: Mode, User mode and Speed icons shown in gray color. - Think Main: Accessing the settings menu, Ope ...

1.- Connecting the zone and control modules of the system to the Airzone ZBS control board Connect the zone modules of the system in any of the three Airzone connection bus terminals. Use the appropriate cable: shielded twisted cable formed by 4 wires: 2x0.22 mm2 + ...

Connect each thermostat to the terminal corresponding to its zone module. Use the appropriate cable: shielded twisted cable formed by 4 wires: 2x0.22 mm2 + 2x0.5mm2 (AWG 20 – 4 wired). In case of Wireless thermostat, check it has the battery on. 3.- Configuration and connection of the relay radiant heat co ...

Connect your Webserver Cloud or BACnet Gateway to the automation bus of the Control Board (follow the steps shown on the technical data sheets). All Airzone systems must be connected to internet to offer technical support. It is only necessary to connect one Webserver Cloud per ...