Breezesta CO-0100 Assembly
Text of Breezesta CO-0100 Assembly
Suggested Tools: Drill, Plastic Mallet, 1/2" Socket Wrench
F
G
H
I
f
g
h
i
j
PARTS
PART
DESCRIPTION
PART NO.
QTY
A
LEFT LEG ASSEMBLY
SA-00083
2
B
RIGHT LEG ASSEMBLY
SA-00084
2
C
SWIVEL SUPPORT ASSEMBLY
SA-00085
1
D
SEAT ASSEMBLY
SA-00089
1
E
ARM CONNECTOR ASSEMBLY
SA-00086
2
F
UNDER ARM SUPPORT
PRT-00146
2
G
LEFT ARM ASSEMBLY
SA-00087
1
H
RIGHT ARM ASSEMBLY
SA-00088
1
I
BACK ASSEMBLY
SA-00069
1
HARDWARE
PART
DESCRIPTION
PART NO.
QTY
a
1
1. Connect Parts A & B to Part
C using Hardware c as shown
4. Rotate Part E clockwise
until tight in the orientation
shown
3. Attach Part E to Part G
using Hardware f
5. Place Part F into the pre cut
slot and attach with Hardware f
Please read entire instructions
before beginning
2. Attach Hardware i to the
previous assembly using
Hardware a
6. Repeat steps 3-5 for Parts
H, E, & F
3
CO-0100 Assembly
7. Place Part D between the
previous assemblies and
attach with hardware c
9. Using Hardware d & a 1/2" wrench,
attach Hardware j, assembly may be
made easier if turned upside down
8. Connect Part I to the
assembly as shown
Bottom View
10. Insert Hardware j into i as shown & push
down firmly until the assembly clicks in place
4
CO-0100 Assembly