Buffalo SRMB08 Operation & User’s Manual

Page 1 of 8 1.0 Edition 2.4GHz Wireless Optical Mouse SRMB08 USER’S MANUAL Important Ergonomic Information Some experts believe that using any mouse may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a qualified health professional. TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:
Take frequent breaks, get up and walk around se ...

Page 2 of 8 1.0 Edition Getting Started Congratulations on your purchase of a 1,500dpi Wireless Optical Mouse. The 1,500dpi high resolution will bring users the best operation accuracy and efficiency, especially when the pixel of display over 1024*768 pixel. It operates at twice the speed and only requires 1/3 of the space in comparison to a 400 dpi mouse. Battery and power consumption is always the key issue ...

Page 3 of 8 1.0 Edition Precaution For consideration of saving battery power, it is strongly recommended to operate an optical mouse on a bright surface with fine texture to obtain lower power consumption of the high illumination LED. A very dark surface will cause higher power consumption. For optimal performance, mouse should be no more than 5M away from receiver. For a better transmission distance, avoid us ...

Page 4 of 8 1.0 Edition Overview Button Definition Button Button Definition 1st Left button 2nd Right button 3rd Middle button/ scrolling wheel 4th Internet backwards 5th Internet forwards 6th Magnifier button Button #1 – Left mouse click Button #5 – Internet Forwards Button #4 – Internet Backwards Button#2–Right mouse click Button #3 – Middle Button Scrolling Wheel Button #6 – Magnifier Button Bat ...

Page 5 of 8 1.0 Edition Hardware Installation Guide (Mouse) Battery installation: 1. Remove the battery compartment cover. 2. Install batteries with the positive (+) & negative (-) in the correct direction indicated by the battery compartment label. 3. Replace battery compartment cover. (Caution: Do not look directly in to the optical emitter. Keep away from young children) Connect the receiver with computer. ...

Page 6 of 8 1.0 Edition Operation Guide BATTERY LOW INDICATION When battery becomes low, battery indicator LED on the top side of the mouse will flashing on/ off when moving or clicking the mouse. The mouse will continue to operate for a period of time depending on usage, but batteries should be replaced immediately. OPERATIONS ON POWER SAVING MODE In order to conserve battery power, the mouse is designed to ...

Page 7 of 8 1.0 Edition Storing receiver: To store in the mouse bottom, place USB plug end of receiver (A) then push the receiver into position (B). Receiver will now be locked into position. Removing Receiver: Push out to life receiver from cavity. The USB is now active and ready to be inserted into your computer’s USB port. n B ...

Page 8 of 8 1.0 Edition GENERAL SPECIFICATIONS  5 Buttons Wireless optical mouse.  Precision Optical Sensor  Long range/ Less interference wireless connection  Low power indicator.  USB storable nano receiver  Ergonomic design (universal left and right handed)  2pcs AA type Alkaline batteries to operate the mouse.  Compatible with USB V1.1 low-speed & USB 2.0 high-speed. Troubleshooting Common troubles ...

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC ...

 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不 得擅自變更頻率、加大功率或變更原設計之特性及功能。  第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾 現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信， 指依電信法規定作業之無線� ...