Fiio E18 Maintenance Instruction

File category: [Maintain Instruction] Product Model: E18 Code NO.: 5510031 Draft by: Engineering Dept. Date: 2014-02-12 Readers: FiiO Official Sales Agents, end users Maintenance Instruction of Replacing E18's Battery & Main Board In order to save the shipping cost sending the defective item back and speed ...

By using cross-head screwdrivers, take out the two screws as shown in the following picture: 2-b. (Replacing battery): Turn over the small main board; take out the foam pad and the battery button; stick some double faced adhesive tape to the new battery and then put it into the battery place. Remarks: After e ...

3-a. (Replacing main board): By using the nipper pliers (put some fabric things on two ends to avoid any damage to the product), clip the front pushbutton and pull out by turning upwards, then to the right to take out the front damper by tweezers or just fingernail, see picture below: 3-b. (Replacing ma ...

Open the base button, take out the flat cable; take out the six screws and the small main board, as shown below: 3-e. (Replacing main board): Take out the four screws, metal plate and battery, see below pictures: Take out the six screws Open the base button, take out the flat cable Take out the four screws ...

Loose the screw nut, and use soldering iron to take out the potentiometer’s hardware plate, as shown below: 3-e. (Replacing main board): Use soldering iron to take out the potentiometer, and then take out the big main board, see below: 3-h. (Replacing main board): Exchange one new main board, and assembl ...