croydon GR1T Instruction Manual

-PLEASE read these instructions carefully before operating this appliance. -The temperature is thermostatically controlled between the range of 50ºC to 300ºC (122ºF to 572ºF). A signal lamp adjacent to the thermostat indicates when heating element is energized. IMPORTANT -This unit is designed to operate on alternative current (A.C.) only. -DO NOT CONNECT TO DIRECT CURRENT (D.C.) -Care should be taken when operating this appliance as HOT SURFACES may cause burns. -Ensure that the power supply cord does not come into contact with hot surfaces. -Do not leave unit in operation without an attendant. -When not in use for long period unplug the appliance. INSTALLATION AND OPERATION -Check if voltage of your power system corresponds to the same specified on the appliance label. -Before using the appliance for the first time, remove the protection coating (MEDICINAL VASELINE) with a damp cloth and turn the control knobs to 300ºC (572ºF), allow griddle to heat for +/- 30 minutes. You will notice some smoke appearing due to the protection coating and internal insulation burning, which is normal. -After 30 minutes heating, turn temperature controls down to operating desired temperature and grease plate, generously with butter or oil. Never allow excess of fat or oil to buildup as this will result in build-up of carbon on the plates, which should be removed with a scraper. -Appliance is provided with grease drawer that receives grease and food scraped residues. -This appliance should be preheated before daily operation. Always allow 15 minutes preheat time before loading griddle with food to give griddle surface time to saturate. -To turn off your appliance turn thermostat knobs completely towards left. - It is possible to turn off the press heater by operating the on-off switch at the front panel. CLEANING PROCEDURE -Always ensure that the appliance is disconnected from the main power supply before cleaning. -Try to scrape as much grease and residues from cooking surface as possible while the unit is still hot. -After appliance has cooled, clean cooking surface and body using only a damp cloth. Never use water jet or immerse appliance in water. -Wipe off appliance with a dry cloth and wait at least half an hour before re-connecting to main power outlet. INSTRUCTION MANUAL CROYDON GR1T-200001 A5 GR1T GR1T The pictures/drawings are illustrations. All data can be changed without notification. CROYDONMAQ INDUSTRIAL LTDA. Estrada São Lourenço, 891 - Capivari Duque de Caxias - RJ / Brasil - CEP 25243-150 Phone: 55 21 2777- 8100 / 55 21 2777-8106 e-mail: [email protected]

Heating Element (3000W) Screw Regulator Heating Element Support Nut Thermal Insulation Heating Element Protection Gabinet Cord Connection Wiring Connection Cord Retainer Screw (3.5) Thermostat Nut (3/16") Screw (3/16") Foot Knob Pilot Light Screw (thermostat) Grease Drawer Bottom Cover Plate Screw Retainer Adapter Plate Shaft Arm 3/16” Nut Shaft Handle 3/16” Screw Lid Spring Suport 3/16” Washer Heating Fixer Heating Element (900W) Upper Heating Plate Shaft Protective Conduit 1/4” Nut Spring Regulator Spring Arm Support Press Heater On-Off Switch 3/16” Washer Press 3/16” Screw Nut Regulator Rubber Protection Thermal Insulation Nut Washer 566 18.404-3 2.065-3 18.455-3 2.109-3 18.452-3 635 18.454-3 18.450-3 18.432-3 2.115-3 2.085-3 9.421-3 552 2.009-3 604 385 1.918-3 2.009-B 3.509-3 330 3.506-3 18.464-3 329 2.805-3 1.343-3 15.024-3 2.638-3 623 2.118-3 2.114-3 481 2.648-3 2.654-3 643 2.036-3 2.035-3 2.649-3 2.646-3 2.604-3 621 2.631-3 2.044-3 2.639-3 37.041-3 594 355 2.196-3 2.113-3 3.503-3 601 642 4 6 7 8 10 22 16 15 17 12 13 11 18 23 20 24 14 9 7 1 2 3 ELECTRICAL GRIDDLE (GR1T) ELECTRICAL GRIDDLE (GR1T) Item Code Description Voltage (V) Power (W) Amperage (A) Weight (kg/lbs) Dimensions W x H x D (cm/in) Technical Data 220 6900 31.4 75/165 100/39.4x41.6/16.4x66.6/26.2 GR1T-200001 A5 19 26 50 36 17 39 41 38 40 28 49 29 33 32 37 41 41 27 27 5 48 44 16 46 35 47 43 42 51 52 34 31 45 Wiring diagram G L2 L1 30 21 35