Crosley CF3027 Quick Start Manual

Text of Crosley CF3027 Quick Start Manual

Top Panel 1 PC Left Frame 1 PC Right Frame 1 PC Bottom Panel 1 PC Back Rail 1 PC Front Rail 1 PC Shelf Frame 1 PC Drawer Left Panel 2 PCS Drawer Right Panel 2 PCS Drawer Front Panel 2 PCS Drawer Back Panel 2 PCS Drawer Bottom Panel 2 PCS Partition Panel 1 PC

ADDITIONAL TOOLS (Not Provided)

Note: It is not recommended to use power tools during assembly . Phillips Head Screwdriver Note: Wood dowels are intended for alignment. Additional clearance between wood dowel and pre-drilled hole is intentional for ease of assembly. 2 PCS Screw 2 PCS 2 PCS 1 PC

Please do not use tools to assemble this unit unless specifically indicated.

Step 1. Insert drawer left panel (part J) and drawer right panel (part K) into drawer front panel (part I) pull down to lock. Slide drawer bottom panel (part M) into grooves of assembled unit (parts I, J & K). Attach drawer back panel (part L) to assembled unit (parts J, K & M) using screws (part #3) and phillips head screwdriver. Re

Step 2. Attach shelf frame (part G) to left frame (part B) using short bolts (part #2),

barrel nuts (part #4), allen wrench (part #8) and phillips head screwdriver. Step 3. Attach bottom panel (part D) to left frame (part B) using short bolts (part #2), barrel nuts (part #4), allen wrench (part #8) and phillips head screwdriver.

Step 4. Insert back rail (part E) into left frame (part B) and right frame (part C) and lock

the hardware. Attach shelf frame (part G) and bottom panel (part D) to right frame (part C) using short bolts (part #2), barrel nuts (part #4), allen wrench (part #8) and phillips head screwdriver. Step 5. Carefully turn unit upright. Attach front rail (part F) to frames (parts B & C) using long bolts (part #1), barr

Step 6. Attach partition panel (part H) to rails (parts E & F) using wood dowels (part #5),

screw (part #3),phillips head screwdriver and lock the hardware. Step 7. Carefully lay down unit on a flat, soft surface, such as carpet. Attach locking casters (part #6) and casters (part #7) to frames (parts B & C) using wrench (part #9).

Step 8. Carefully turn unit upright. Attach top panel (part A) to assembled unit (parts B,

C & H) and lock the hardware. Step 9. Slide assembled drawers into place.

Crosley Indoor Furnishing Owners Instructions: