Anest Iwata ISP-50 Instruction Manual

Oilfree Scroll Vacuum Pump ISP-50 ※Before use, be sure to fill in the blank spaces below for future repair and after-service. Serial No. Who sold it to you Purchase date When you began operation This instruction manual includes very important warnings, cautions and operating procedure in order to operate this pu ...

correctly. Only operators, who fully understand warnings, cautions and instructions, are to operate the equipment. Improper operation (mishandling) can cause serious bodily injury, death, fire or explosion. Store this manual in a con ...

Below is very important information about how to safely operate the equipment. Before operation, be sure to read and fully understand the contents. WARNING Be careful about lifting Danger of cargo collapse Hold the bottom of the product (ISP-50 mass 12kgs) firmly, when installing vacuum pump. If not, it can cause damage, failure or ...

WARNING Be careful about insertion Danger of short-circuit and electric shock Insert the connector to the receptacle surely by using an electric wire with an appropriate connector. If not, it can cause short-circuit fire or bodily injury from electric shock due to looseness or disconnection. With a thermal protector [Only si ...

CAUTION Use at designated temperature Danger of overheating Operate at ambient temperature of 5℃～ 40℃. Operating at a temperature range other than that designated can cause accident, failure or bodily injury such as burns due to overheating. Pay attention to ventilation Danger of overheating Install in a well-ventilated area. ...

CAUTION Open air inlet Danger of abnormal sound and failure Open inlet to atmosphere for about 5 seconds before restarting vacuum pump. If not, it can unbalance temperature inside vacuum pump, resulting in failure. Beware temperature of intake gas Danger of exceeding permissible temperature of intake gas If intake gas temper ...

Where to attach warning stickers Always keep warning stickers clean and legible. If they become dirty or detached, replace them with new ones. If you need replacement stickers, contact the dealer who sold the vacuum pump to you. Motor frame Receptacle Cooling fan Beware of Electrical shock Beware of high temperature ...

Important information .............................................................................................................1 For safe operation .......................................................... ...

1.1 Check the product ・ ・ ・ ・Check that the package is right-side-up before opening. ・ ・ ・ ・Check that the model of the product is the same as the one you ordered. How to read model name I S P – 5 0 – S V 1 ISP：model Inlet direction V：vertical Motor S：Single phase Displacement (swept v ...