Heathkit SB-10 Troubleshooting Manual

File Specifications

Brand: Heathkit
Category: Transceiver
Model: SB-10 (Troubleshooting Manual), prmZniBrj/Pzc
File Type: PDF
File Size: —
Pages: 190 pages

Download Document

Get a high-quality, printable PDF version of this manual for offline use.

Download PDF Manual (190 pages)

⚠️ Download Safety: This PDF is completely safe to download (last scan date: 22/05/2026).

Read Online

Read the Heathkit SB-10 Troubleshooting Manual online using the built-in PDF viewer.

Key Pages of Document

2021/1/9: Added modification section regarding use of an external VFO to provide split

frequency operation (within the same band). 2021/1/9: Significant cleanup work on MS Word’s handling of list numbering 2021/1/8: Added instructions for confirming bandpass filter response using sweep generator and a couple of photos of one radio’s response for reference. 2021/01/01: Added Transmit RF Signal level measurements. 2021/01/01: Added addit ...

Heathkit HW-101 and SB-10x Restoration and Troubleshooting...............................1

a)History of the HW-101................................................................................................14 a.1.The SB-series and HW-series (Wikipedia)....................................................................15 a.2.Comparison of Various Models.....................................................................................16 a.3 ...

An 11 megohm input VTVM, such as the Heath Model IM-11 , (a 20 K /V VOM may

 also be used)..................................................................................................................32 A 50 nonreactive dummy load that is capable of 100 watts dissipation, such as  the Heathkit Model HN-31. Do not use light bulbs as a dummy load, as their resistance varies radically with voltage.................................................... ...

s.2.1.Final Heterodyne Oscillator Alignment.........................................................................................................38

s.2.2.Driver Neutralization Adjustment..................................................................................................................38 s.3.LMO Shifter Adjustment.................................................................................................39 t)Uneven Response Across the ...

x.1.4.AGC Figure of Merit......................................................................................................................................60

x.2.Summation......................................................................................................................60 y)Heathkit “S” Meter Circuit.........................................................................................61 y.1.“S” Meter vs. AVC Voltage....... ...

ab)If the dial pointer is to the right of the "5" marking, loosen the dial pointer

drive arm mounting screws and move the dial pointer drive arm base down until the dial pointer is at the "5" marking. Retighten the screws....................................71 ab.1.1.Dial Calibration...........................................................................................................................................71 ab.1.2.Re-engaging the Main Tuning ...

ae.1.Modulator Printed Circuit Board 85-127-x................................................................109

ae.1.1.85-127P221 (SB-100, SB-101).................................................................................................................109 ae.1.2.85-127-1 (SB-101)....................................................................................................................................109 ae.1.3.85-127-2 (HW-100, HW-101).... ...

ag.1.3.Matching Heathkit Paint: Part 3................................................................................................................135

ah)HW-101 and SB-10x Service Bulletins.................................................................136 ah.1.HW-101 Service Bulletins...........................................................................................136 ah.1.1.HW-101-1: VFO Drift................................................. ...

ah.1.39.HW-101-35: Poor IF Sensitivity..............................................................................................................145

ah.1.40.HW-101-36: Receiver Recovery Slow....................................................................................................145 ah.1.41.HW-101-37: R-940 Shorting To Shield...................................................................................................145 ah.1.42.HW-101-38 ...

ah.1.82.HW-101-78: Tune Control Slips..............................................................................................................158

ah.1.83.HW-101-79: Driver Stage Oscillates on 15 Meters.................................................................................158 ah.1.84.HW-101-80: Low Transmitter Output Due to Low VFO Output..............................................................158 ah.1.85.HW-101-81: Preselector Capacitor ...

ah.4.4.SB-102-4: LMO Instability.........................................................................................................................176

ah.4.5.SB-102-5: Low 40 Meter Output...............................................................................................................176 ah.4.6.SB-102-6: SB & HW Series Audio Preamplifier & VOX Circuit Trouble Shooting Guide.........................177 ah.4.7.SB-102-7: SB & HW Series Inst ...

History of the HW-101

By K8GNZ (8/2003) The Heathkit HW-101 evolved out of several prior Heathkit models, namely the SB-100, SB-101, SB-102, and the HW-100. To understand the history of the HW-101, one needs to know a little about the history of these prior models and of the Heath Company in general. The Heath Company: The Heath Company was involved in building test equipment and other devices prior to its entry into the amateur radio market. It was the ...

The HW-100: The Heathkit HW-100 was an attempt, and a very good one, to reduce the

cost of the SB series transceivers. The circuitry and specifications were very similar, but some shortcuts were taken to reduce the cost. These were mainly in the cabinet, the VFO, and the lack of a CW filter. It was produced concurrently with some of the more expensive SB series equipment, being introduced in the late 60's. It was very successful, due in large part to it's ...

When used together, the SB-300 receiver and SB-400 transmitter could transceive and

had many other features of the S/Line, including crystal bandwidth filters and 1 kHz tuning dial resolution. The S/Line influence was easy to see too, in its cabinet styling, tuning mechanism and knobs. But by designing them as kits and using less expensive construction, Heathkit could offer these units at much lower prices. The pair sold for $590 that first year (equivalen ...

Bias setting, and S Meter zero adjustment. On the HW series, these controls are

accessed through openings in the right side lower cabinet. The HW series uses a builder assembled VFO with a circular dial and frequency calibrations every 5 KHz. The dial reduction drive consists of two Jackson venier drives. The SB series used a preassembled LMO with a circular dial having calibration marks every 1 KHz. The dial reduction consists of a pinch pulley that engag ...

"static" signal that occurred with or without the antenna attached. Replacing the

defective tube(s) eliminated the problem. I experienced this problem in one of my HW- 101s. Turned out both V10 and V11 were both shorted internally. The price of a 6HS6 is a bit steep, $18 (www.vacuumtubes.net price), higher (www.vacuumtubes.net price). Both tubes are available, depends on which outlet you use and whether you are willing to pay $18+ for one tube. I personall ...

SB-102 vs. HW-101

What's the difference between an HW-101 and an SB-102? Well, first off, the obvious is the physical appearance (front panel and both top and bottom covers). The HW-101 can only be used with the internal LMO where the SB-102 can use both internal and external LMOs by the flick of a front panel switch. There are differences between the SB-100 and SB-101 LMOs themselves and the power source wiring when compared to the SB-102 LMO and t ...

The SB-100, 101, and 102 along with the HW-100 and HW-101, have the same basic

circuitry and require the same power supply, the HP-23/PS-23 series of power supplies. HW & SB History revised 12/17/2021 Page 20 ...