Ikelite DS160 Manual 

purchase. Our product registration database is the best way for us to get a hold of you in the event of a product update or recall. DS160 Strobe Product Numbers 4060US • 4060EU • 4060AU • 4060UK DS161 Strobe Product Numbers 4061US • 4061EU • 4061AU • 4061UK ...

Thank you for your purchase of Ikelite equipment. Please read this instruction manual completely before attempting to operate or dive with this product. Please visit ikelite.com to register your product to receive information on any updates, notices, or recalls pertaining to your equipment. Included in the Box • DS160 Strobe Front # 40 ...

strobe front. » NEVER use, ship, or travel with a water damaged battery pack. Use of a water damaged battery pack is a safety risk and can cause damage to the strobe electronics. » Store strobe front and battery pack in a cool, dry location when not in use. ...

2 Included in the Box 2 Important Notices 3 Getting to Know Your Strobe 6 Setting Up Your Strobe 8 Removing the Battery Pack 8 Attaching the Battery Pack 8 Using the Diffuser 9 Attaching the Diffuser 9 Choosing an Arm System 10 Attaching a Sync Connector 11 Using Your Strobe 12 Checking Battery Level ...

Batt w/Lite Off On On w/Lite TTL Full Fuel Guage Ready Light 3 2 1 -2 -3 -4 -1 SOS Battery Pack Shroud Flashtube Refl ector DS161 Video Light DS160 Modeling Light Bulkhead Mount ...

Toggle Lock BACK Mount TTL Full -2 -1 -3 -4 Rea Fuel Gauge 3 2 1 SOS Batt w/Lite Off On On w/Lite SIDE Exposure Switch Fuel Gauge Ready Light Power Switch Switch Lock ...

Removing the Battery Pack » The battery pack is NOT waterproof when detached from the strobe front. 1. Turn the Power Switch to the OFF position and place the strobe face down on a fl at surface. 2. Slide the toggle lock out and fl ip up. 3. Rotate the toggle lock counter-clockwise 90 degrees. 4. Remove the Battery Pack from ...

and rotating 90 degrees counter-clockwise. 4. Align the battery pack with the front of the strobe. The switches on the side of the strobe and battery pack will line up when properly oriented. 5. Press the battery pack down gently but fi rmly until it is fl ush with the strobe ...

front of the strobe. 3. Press the diffuser down and rotate counter-clockwise until it stops. Choosing an Arm System • An aluminum ball socket arm system is recommended to adequately support the strobe while allowing the most fl exible positioning options. • Most arm systems are de ...