Gigabyte A5 Quick Start Manual
Text of Gigabyte A5 Quick Start Manual
Connect the power cord to the AC adapter.
2
Connect the adapter to the Power (DC) Input Port on the back side of the
notebook.
3
Connect the power cord to the power outlet.
4
While the Battery Indicator lights on, press the Power Button to turn on the
notebook.
Switching on the Power:
After you turn on the notebook for the very first
time, do not turn it off until the operating system
has been configured. Please note that the volume
for the aud
GIGABYTE Notebook Tour
● Do not remove the built-in lithium battery.
For any service needs, please contact your local GIGABYTE Authorized Service Center.
● Do not install the Notebook PC on a slant or a place prone to vibrations, or avoid using the Notebook PC in that location for
a long time.This increases the risk that a malfunction or damage to the product will occur.
● Do not store and use Notebook PC in direct sunlight or the location
The computer employs hotkeys or key combinations to access most of the computer’s
controls like screen brightness and volume output. To activate hotkeys, press and hold
the key before pressing the other key in the hotkey combination.
Hotkey
Description
Fn + ~
Play/ Pause(in Audio/Video Programs)
Fn + F1
Touchpad Toggle
Fn + F2
Turn LCD Backlight OFF
(Press a key to or use Tochpad to turn on)
Fn + F3
Mute Toggle
Fn + F5 / F6
Volum
System Backup Guide
WARNING
y You can backup original recovery image through this application in case of losing by device damage.
y You can backup original recovery image to USB Flash Drive and restore the system if any storage system
replacement with the recovery USB Flash Drive.
y Before you restore the system through the recovery USB Flash Drive, please make sure that you have already made
the backup of your data.
y Please DO NOT shut d
System Recovery (Restore your laptop operating system)
When something is going wrong with the laptop operating system, the storage of the
laptop has a hidden partition containing a full back up image of the operating system
that can be used to restore the system to factory default settings.
Note
y If the storage has been switched or the partition deleted, the recovery option will no
longer be available and a recovery service will
Windows 10 Recovery Guide
1
Turn off and restart the laptop.
2
During the laptop turn on process,
press and hold F9 key to launch the tool.
3
Choose "Troubleshoot" to enter the recovery settings.
( Also you can choose "Continue" to exit recovery system and continue to Windows 10 for files
or data backup. )
There are two options for system recovery
˙ Reset this PC -
You can choose to keep or remove your files and then reinstalls Windows without
l
Use a restore point recorded on your PC to restore Windows.
System Image Recovery
Recover Windows using a specific system image file.
Startup Repair
Fix problems that keep Windows from loading.
Command Prompt
Use the Command Prompt for advanced trobleshooting.
UEFI Firmware Settings
Change settings in your PC’s UEFI firmware.
Startup Settings
Change Windows Startup behavior.
Appendix
Warranty & Service:
Warr