Happybeds Jay-Be Revolution Assembly Instructions
Text of Happybeds Jay-Be Revolution Assembly Instructions
Title of Product
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging t
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain part
Step 1 - Begin by fitting the castors
Step 2 - Release clip and open
WITH THE CLIP REMOVED LOWER
BOTH SIDES OF THE BED.
AS YOU OPEN THE BED
REMOVE THE HEADBOARD.
TIP! Look after your clip
you’ll need it again.
INSERT YOUR CASTORS INTO
THE BED FRAME AS SHOWN.
Begin by inserting the pins into
your castors (these are a tight fit)
Need assistance? Contact us directly
See back page for more details.
Step 3 - Fix your headboard
Step 4 - Your bed is now ready for use
POSITION THE MATTRESS AND
YOUR BED IS NOW READY USE.
REVERSE THESE STEPS TO FOLD AWAY.
TIP! Try to discourage children
from jumping on the bed!
USING THE SCREWS PROVIDED
ATTACH THE HEADBOARD.
LOOKING FROM THE
BACK OF THE BED
ONCE ATTACHED FLIP YOUR
HEADBOARD INTO THE UPRIGHT
POSITION READY FOR USE.
TIP! You’ll need two Phillips
screwdrivers to perform this task!
x2
Register your product f
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the product across the
floor as this will cause damage to the joints. If the product is used on hard flooring, such as
wood or laminated floo