Hanlong UC802(P) Operation & User’s Manual
Read Online
Read the Hanlong UC802(P) Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
Nanjing Hanlong Technology Co., LTD. owns all the right to revise and change this document at any time. And all the illustrations and instructions in this paper are subject to the copyright protection of legal law. No parts of this document may be used or reproduced, transmitted by the third parties for any purposes without t ...
the surface or internal electronics of the phone. http://arttel.ru ...
3 Table of Content Notices Information ........................................................................................................................1 Copyright ..................................................................................................................................1 Safety cautions.......................................................................................................................... ...
No Key Entry Timeout............................................................................................................42 Keypad Lock...........................................................................................................................43 Hot Line ....................... ...
The phone device The footstand Handset Headset cord 5 http://arttel.ru ...
Phone Installation 6 http://arttel.ru ...
2. Connect the Handset and optional Headset 7 http://arttel.ru ...
Initialization After your phone has been powered up, the system boots up and performs the following steps: Automatic Phone Initialization The phone finishes the initialization process by loading the saved configuration. The phone LCD screen will display "Booting" And then show “Initializing “during the initialization. 8 http://arttel.ru ...
valid network settings, e.g. IP address, subnet mask, default gateway, DNS server. 9 http://arttel.ru ...
Getting Familiar with Your Phone Hardware Components Preview Item Description LCD screen To Presentation all information about the date& time, accounts, soft keys, messages, calls and other some information. Power Indicator LED To indicate the power status Line keys The phone supported up to 4 accounts Steady green: idle interface, during a call.. Blink red: a call incoming Soft keys Labels automatically to identity their c ...
Left arrow key: To move left of the selection shows on the screen. Down arrow key: To move down of the selection shows on the screen. 1. To return to idle scr 11 een. 2. To cancel the information or call on the screen. Mute key 1. To mute the voice during the call (green light). 2. To un-mute the call. Memory Keys To be configured as different function as: Line Speed Dial BLF BLF List Voice mail Direct Pickup Group Pic ...
Light Drown: Unregistered Speaker Press this button to place a call in hands-free mode. Volume To decrease the volume. To increase the volume. Alphanumeric keypad To enter the phone numbers, letters and so on. Message To indicator the New message, and press to read. Headset To indicate that the phone is or not in Headset mode. 12 http://arttel.ru ...
Icon Preview Icon Description Network Registered succeed Unregistered Speakerphone mode Handset mode Headset mode Mute Forward Do Not Disturb Received calls Dialed Calls Missed calls Forward calls 13 http://arttel.ru ...
14 Memory Key Function Overview Line Speed Dial BLF BLF List Voice Mail Direct Pick Up Group Pick Up Call Park Intercom DTMF Prefix Conference Forward Transfer Hold DND Redial http://arttel.ru ...
15 Call Return Record URL Record Paging Group Listening Public Hold Private Hold Shared Line URL http://arttel.ru ...
Basic Features Configuration This part will mainly introduce the basic configuration as the Time, Language, and Volume… Web Login Get the IP address: Press Menu Status Information Input the IP Address in the web browser. Input the user name (default is admin), password (default is admin). Login successfully. 16 http://arttel.ru ...
Note: The PC and phone should be in the same segment. When register the accounts in web and the server port is not “5060”, then “SIP Server” should be set as “SIP Server’s IP address: server port.”, for example, “192.168.0.122: 5090”. Administrator Password The password is mainly used for login the web interface or set the advanced settings through phone interface. And the default password of the administrator ...
Management Password Fill the value Click to save the configuration. Note: When you use the web interface: user name: admin password: admin(default) Language The default Phone interface language is English. To change the language via Phone interface Press Menu Setting Basic Settings Language. Press or Save soft key to save the configuration. 18 http://arttel.ru ...
To change the language via Web Interface Setting Preference Web Language Select the necessary one. Press to save the configuration. Note: All languages may not be available for selection. The available languages depend on the language packs currently loaded to the IP phone. Time and Date The time and date show on the idle page, and it can be set and change by SNTP server automatically or manual setting. To configure the tim ...
