Handicare SystemRoMedic ReTurn7400 Manual
Text of Handicare SystemRoMedic ReTurn7400 Manual
Handicare SystemRoMedic ReTurn7400 Manual no: 840 En Ver. 8 120525
ReTurn7500 and ReTurn7400 are used indoors for shorter transfers between wheelchair and bed, wheelchair and toilet/
portable toilet/wheelchair or chair/armchair. ReTurn7500 and ReTurn7400 can also be used to aid repositioning farther
back in the chair. Both models are designed for easy manoeuvring and use in confined spaces. They are easy to assemble
and disassemble in just two sections for easier transport and storage. Re
Handicare SystemRoMedic ReTurn7400 To transfer with ReTurn, the patient must be able to:
• support weight while standing
• stand up and maintain balance (with support)
• grasp handles
• understand instructions
NOTE! Increased tipping risk.
If ReTurn7400 is used for patients of normal height, it is essential that the patient
can support his/her weight while standing and can maintain balance for a pro-
longed period.
A. Push the rising ladder/tube down into the mounting fixtures on th
Chassis and placement of feet
The feet are placed one on either side, see foot markings on base plate.
The patient’s weight must be centred on the product’s support surface (all weight between
the wheels); i.e., the patient must be in a standing position. The patient’s weight must not
be outside of the support surface.
Brakes
There is a brake for each wheel. With your foot, press down on the red marking on the brake
plate. Press all the way down.
To
Testing standing function
ReTurn is ideal for testing a patient’s standing function in cases where there is
uncertainty as to whether the patient is able to rise from a seated to a standing
position.
Training standing function
ReTurn can be used to train the patient’s standing, sitting and sit-to-stand func-
tion. To measure improvement, use a stopwatch or clock with a second hand to
time the patient.
Farther back in the chair
If the patient slides for
Bed to wheelchair
Place the wheelchair at some distance from the bed to allow enough working
space. Lock the wheelchair wheels. Place the patient’s feet on the base plate.
The patient grasps the raising ladder, leans forward, and then raises himself/
herself.
Pull the ReTurn back somewhat, and then steer in towards the wheelchair.
Position the ReTurn close enough to enable good placement in the wheelchair.
The caregiver applies counter pressure
Brake the wheels on the ReTurn. The patient then leans forward and grasps the handles on the ReTurn. The caregivers
then grasp the handles on the ReTurnBelt.
ReTurnBelt allows different gripping alternatives, and helps and encourages the patient to lean forward.
One caregiver helps the patient to lean forward and provides support during raising.
Using ReTurnBelt together with ReTurn7500
See manual for ReTurnBelt.
ReTurnBelt is used for raising from a seate
To toilet/shower chair
For transfers to the toilet, space is allowed for the caregiver to assist the patient with
the pants. The back also has a small recess that allows the patient to get close to the
toilet and achieve a good seated position.
ReTurn7500:
Do not secure the clasp on the ReTurnBelt before rising. When the patient is in a standing position facing the ReTurn, the
strap can be placed around one of the vertical handles.
Secure the clasp on the
Contact your local distributor if you have any questions about the product and its use. See www.handicare.com for a
complete list of distributors. Always make sure that you have the right version of the manual. The most recent editions of
manuals are available for downloading from our website, www.handicare.com.
Care of the product
• Use a soft cloth and mild cleaning agent such as dishwashing liquid or car shampoo to clean the ReTurn. Do not use
abrasiv