Hanbell SAM-285 Operation Manual

Text of the manual

SHANGHAI HANBELL PRECISE MACHINERY CO.,LTD.

No.108, Jiangong Rd., Fengjing Area, Jinshan District, Shanghai TEL/FAX : 021-57350280 / 021-51368588 http://www.hanbell.com.cn E-mail: [email protected] Oil-Free Scroll Compressor Operation Manual

Thank you for using Hanbell products.

All Hanbell products are through quality and performance control tests prior to delivery. However, the guaranty period for oil-free scroll air end is based on the product within 12 months after the completion of installation and commissioning at the first job-site or within 15 months from the date of d

When you compile the operation manual for the equipment with Hanbell scroll air end, all the information

and data related to operation safety in this manual shall be fully considered. Please read this manual carefully and make sure fully understand the contents before using the machine.  The pressure in this manual refers t

1. General provisions ..................................................................................................................................... 5

1.1 Models ................................................................................................................................................ 5 1.2 Identifi

1. General Provisions

1.1 Models ; SAM-285, SAM-440, SAM-700 Product coding principles i.e. for SAM -440-08 are as follows: SAM: model series; 440: inlet volume : l/min; 08: discharge pressure: kg/cm^2 The scroll air end rotates counterclockwise from the shaft end direction. If the customer has special requirements for the model, please co

All parts must be connected to complete the final product - scroll compressor system. The scroll

compressor system must be installed according to the current reasonable safety and accident prevention regulations Figure for belt-type compressor When belt drive is adopted:  V-type belt is recommended, refer to Standard DI

direct sunlight in the environment, otherwise, compressor service life will be reduced, and failure,

damage or fire, etc,. Make sure that the connection is correct and that the compressor can be turned properly during the final installation. Clearance for inspection and maintenance must be reserved around the compressor. C. Storage

2.1 Employee qualification and training

The employees who operate and maintain Hanbell scroll compressor shall be authorized, trained and certified, and shall be familiar with the existing safety rules. The company using Hanbell scroll compressor shall explain the scope of responsibility and the ability of employees sha

 Maintenance, repair and assembly can only be carried out when the machine is fully "stopped". The measures

and methods described in the "operation instructions" to stop the machine must be fully followed.  Sealing parts and bearing grease should be used correctly.  After the maintenance of the scroll air end is finished and it is

Other Air Compressor Manuals