Asko DSD433B Operating Instructions Manual
Text of Asko DSD433B Operating Instructions Manual
Asko DSD433B Before washing for the first time
5
Loading the dishwasher
8
Using the dishwasher
12
Settings
14
Care and cleaning
16
Troubleshooting
19
Technical information
20
Installation
21
Service
22
Information for test institute
23
Your notes
24
Quick guide
Dear Customer,
Thank you for choosing this quality product from ASKO.
We hope it will meet your expectations and fulfil your needs for many years to come. Scandinav
Asko DSD433B • Read the operating instructions and keep
them in a safe place!
• Number of standard place settings: 13
• Never use the dishwasher for any purpose
other than that specified in these operating
instructions.
• Do not load the dishwasher door or
dishwasher baskets with anything other than
dishes.
• Never leave the dishwasher door open as
someone may trip on it.
• Use only dishwasher detergent!
• This machine can be use
Before washing for the
first time
1. Checking water hardness
In order to achieve good dishwashing results, the dishwasher needs
soft water (water with low mineral content). Hard water leaves a white
coating on dishes and the dishwasher.
Water hardness is specified using the German water hardness scale
(°dH) or the French water hardness scale (°fH).
A water supply with a water hardness in excess of 6°dH (9°fH) must
be softened. This is done automaticall
Set water hardness 0/1/2/3/4/5/6/7/8/9
3
Adjusting the water softener. Select a setting depending on the
hardness of the water supply. It is important that this setting is correct!
Do not forget to put salt in the salt compartment after you have set
the water softener to 1 - 9.
For a water supply with a hardness under 6°dH (9°fH), select 0. The
water softener is deactivated and no salt is needed.
Pre-selected at factory: 4
Top up salt
Salt compartment li
Some cookware is not dishwasher safe. This can be for several reasons.
Some materials cannot withstand strong heat, others can be damaged
by dishwashing detergent.
Exercise caution with, for example, handmade items, fragile decoration,
crystal/glassware, silver, copper, tin, aluminium, wood and plastic.
Look for the "Dishwasher safe" marking.
Fragile decoration
Porcelain with decoration on top of the glazing (the items feel rough)
should not
Washing large plates
Move foldable tines and their mounts to widen the distance between
the tine rows to adapt the lower basket to plates with a diameter greater
than 25 cm.
Accessory
Buy a wine glass shelf with space for six tall 1) wine glasses. The wine
glass shelf is designed to ensure optimal washing and drying results
with tall wine glasses. The wine glass shelf is placed in the rear section
of the lower basket. This accessory is available where you
Using the dishwasher
Add detergent
Press to open
1
Prewash detergent compartment
2
Main wash detergent compartment
Detergent is added according to water hardness.
Follow the instructions on the detergent packaging. This dishwasher
is fitted with a water softener, so use detergent and rinse aid doses
suitable for soft water.
Too much detergent can result in less effective dishwashing and also
entails greater environmental impact.
The detergent compartment m
Starting the dishwasher
Select a programme mode
Select any options
Press and hold the main power switch until the display lights up.
Select the programme
The main power switch
Open the door and press the main power switch. Also turn on the water
tap if it is turned off.
Select a programme
Eco is always pre-selected. To select another programme, press the
navigation button
until the desired programme is shown on the
display.
Select a programme to s
Asko DSD433B Once you have chosen a programme, programme mode and options,
the time the programme took when last used is displayed.
Status light™
Status light
The status light at the bottom on the dishwasher provides information
by means of 3 different colours.
Blue - Load more
The programme has started, but you can still load more dishes.
Red - Do not load
You should not load more dishes (risk of poorer dishwashing result).
Flashing red indicates a pr
Consumption values 1)
Final rinse
Number
of rinses
Main wash
Prewashes
Programme
mode / Option
Detergent,
compartment 2
(ml)
Programme
Water cons.
(liter)
Hot water 3)
Cold water 2)
Energy
(approx. kWh)
Dishwashing
time
(approx.
hrs:min)
Energy
(approx. kWh)
Dishwashing
time
(approx.
hrs:min)
9.7
0.5
4:10
0.82
4:30
50 °C
2
52 °C
1
5)
25
Eco 4)
15
0.6
1:35
1.2
1:55
65 °C
2
60 °C
2
25
Daily
11-19
0.4-1.2
0:15-2:30
0.5-1.6
0:15-2:30
<65 °
Open the dishwasher's Settings menu
To open the dishwasher's Settings menu, press the navigation button
until Settings menu is shown on the display and confirm
your selection with the mode selector
.
To exit the dishwasher's Settings menu, select Exit and confirm your selection with the mode selector
.
2. Child lock
On
Mode selector to confirm current setting
Settings
Current setting
Navigation button for selecting a setting
Options
Settings
You
Super rinse adds two extra rinses.
On/Off
Super rinse
6.
Activated in the following programmes:
Daily
Intensive
Activate the setting High temperature to improve the dishwashing
results. Energy consumption is slightly increased.
On/Off
High temperature
7.
Activated in the following programmes:
Daily
Intensive
Activate the setting Extra Dry to improve the drying results. Energy
consumption is slightly increased.
On/Off
Extra Dry
8.
Activated
Care and cleaning
Top up rinse aid
When the rinse aid needs topping up, the above symbol lights on the
display.
Press to open
1
Open the rinse aid compartment lid.
2
Carefully top up with rinse aid to the level marked max.
3
Wipe up any splashes of rinse aid around the compartment.
4
Close the lid firmly.
After topping up, it may take a while before the symbol goes out.
Top up salt
When the salt needs topping up, the above symbol lights on the display.
Sal
Upper spray arm
•
The upper basket must be removed before the upper spray arm
can be released. Pull out the upper basket and turn the basket
catch on each runner outwards (see illustration). The basket can
now be removed.
•
Pull the upper spray arm straight up to release it.
Lower spray arm
•
Pull the lower spray arm straight up to release it.
The door and the door seal
Regularly clean the sides of the door and the door seal. Use a slightly
damp clot
Asko DSD433B Type of fault on the display
Clear the drainage pump. See the chapter Care and cleaning. If the problem persists, call the
service department.
Overfilling water 1
F10
See “Water remains in the dishwasher” in the table “Problem” below. If the problem persists, call
the service department.
Water outlet fault
F11
Check that the water tap is on. Check that the outer filter on the inlet hose is not blocked. See
Unblocking the inle
Press and hold Start/Stop until the display shows
"Program started".
The Start/Stop start button has been pressed for
too short a time.
The dishwasher does not start.
Check.
The door is not properly closed.
Close the door and wait. After a while, the
dishwasher continues the programme.
You have opened the dishwasher to add more
dishes while a programme is in progress.
Check the door lock. If it has not clicked into
place and
See the chapter Settings.
Incorrect rinse aid dosage setting.
Spots or films on the dishes.
Switch all-in-one detergents or deactivate the
setting TAB and top up with salt and separate
rinse aid. See Rinse aid in the chapter Settings.
The setting TAB is activated and all-in-one
detergent with insufficient drying effect is being
used.
Top up with salt. See the chapter Care and
cleaning.
Salt compartment empty.
See Water hardne
Information on energy labelling
Information sheet, in compliance with Commission Delegated Regulation (EU) No. 1059/2010
ASKO
DSD433B
Model designation:
13 1)
Number of standard place settings:
A+++
Energy efficiency class:
234 kWh per year 2)
Annual energy consumption(AEC):
0.82 kWh
Energy consumption of the standard cleaning cycle(Et):
Power consumption
0.49 W
Off-mode (Po):
0.49 W
Left-on mode (Pl):
2716 litres per year 3)
Annual w