Systemline SE0512 Operation & User’s Manual

CAUTION: To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside. Refer to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Read Instructions: All the safety and operating instructions should be read before the ...

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and us ...

E50 Rear View Rear panel connections 1. Power input Use ONLY the power supply provided. Failure to do so may cause irreparable damage to the unit. DO NOT alter the length of the supplied DC extension cable 2. Analogue audio – line in Connect an analogue audio input here using a stereo 3.5mm jack cable such as QED Perf ...

Front panel connections 6. Analogue audio - line in Connect an analogue audio input here using a stereo 3.5mm jack cable such as QED Performance J2J. A green LED means this input is active. Front panel controls 7. Standby indicator Illuminates red to indicate the unit has entered standby. 8. Standby/on key Touch here ...

1. The E50 is always in pairing mode. Navigate to the Bluetooth devices list on your phone or other Bluetooth transmitter device. Select Systemline E50(_n) from the device list. If the phone has not previously been paired a Bluetooth pairing request will be displayed on the phone. On the E5 ...

1. Use your four outstretched finger tips to flick from right of the volume up key to left of the volume down key in a single consistent sweeping motion from right to left at a distance of up to 70mm from the front panel. Do not actually touch the front panel. The track will skip back. Skip track back using hand gesture ...

1. Touch the volume up key to increase the level of the music, and touch the volume down key to reduce it. 2. The same functionality can be achieved using a convenient gesture control. 3. Use your index finger to describe a circular pattern within the confines of the four touch key symbols at a distance of up to 70mm from the front p ...

1. Use your four outstretched finger tips to flick from above the standby key to below the source key in a single consistent sweeping motion from top to bottom at a distance of up to 70mm from the front panel. Do not actually touch the front panel. 2. The music will mute and the white volume LED will gently pulse. In Bluetooth mode the ...

1. Press the standby key. The E50 will turn off and the red LED will illuminate. In this mode the amplifier is turned off and the Bluetooth connection is dropped. The E50 is still in Bluetooth pairing mode and will wake instantly when the standby key is pressed or when paired. To put the E50 into deep standby 1. Press and hold ...