suprema XPass D2 How To Configure

- https://kb.supremainc.com/knowledge/ Table of Contents How to Configure D2 Keypad 1 .............................................................................................................. Adding as a Slave Device 1 ...................................................................................... ...

- https://kb.supremainc.com/knowledge/ System Configuration, BioStar 2, “D2, Keypad” How to Configure D2 Keypad Xpass D2 Keypad is a new device introduced with BioStar 2.6.2. It is a dummy reader for reading cards or PIN, which means it doesn’t perform data matching on the device. The device can be used a ...

- https://kb.supremainc.com/knowledge/ Possible key input ranges The range of numbers that can be received by the keypad is 8 bytes (0 to 18,446,744,073,709,551,615) Using the device as a Wiegand Reader If you have already used the device as a slave device before, you must reset the device to use it as a Wiegan ...

- https://kb.supremainc.com/knowledge/ You cannot use the device as a slave device and use Wiegand output at the same time. From: https://kb.supremainc.com/knowledge/ - Permanent link: https://kb.supremainc.com/knowledge/doku.php?id=en:how_to_configure_d2_keypad Last update: 2019/02/26 22:36 ...