Steren INV-400 Quick Start Manual
Read Online
Read the Steren INV-400 Quick Start Manual online using the built-in PDF viewer.
Key Pages of Document
POWER INVERTER / INVERSOR DE VOLTAJE 12VCD A 110VCA Model / Modelo: INV-400, INV-600, INV-1000 Brand / Marca: Steren CONDICIONES 1. Para hacer efectiva esta garantía se requiere: La presentación de esta póliza y del producto, en el lugar en donde fue adquirido o en ELECTRONICA STEREN S.A. DE C.V. 2. ELECTRONICA STEREN S.A. DE C.V. se compromete a reparar el producto en caso de estar defectuoso sin ningún cargo al consumido ...
Model: INV-400, INV-600, INV-1000 Brand: Steren Before using your new DC to AC power inverter, please read this instruction manual to prevent any damage. Put it away in a safe place for future references. This voltage inverter is an advanced energy conversion tool that can take direct current (DC) and turn it into an alternate current (AC). This makes the inverter a versatile tool that can be used in cars, bo ...
while the inverter is in use 7.- Ground connector(Only INV-1000) .. Allows you to ground the inverter 8.- Restore button …………………….... Press this button after the inverter protection operates, in this way, the equipment will works correctly after this process 6.- Ventilador ......................................... Permite enfriar los circuitos internos del in ...
battery. Make sure do not overload the maximum inverter voltage capacity (400, 600, 1000W, depending of the model). Pay attention to polarity when plug the alligators to the battery. Red terminal is positive (+) and black terminal is negative (-). INSTALLATION a) Selecting the battery power source You must use a power source with a minimum voltage of 10,5V and a maximum voltag ...
source. At this moment, make sure you placed the negative end in a right way, from the inverter to the battery. 5.- Use the black alligator to connect the inverter to power source’s positive end (+). 6.- Turn the inverter on. The indicator light and the surge indicator will light up. 7.- Turn the inverter. The installation finished. Notes: If the polarity is inverted, may cause seve ...
The inverter will automatically turn off when the DC voltage is above the required amount. The input voltage range is 11 – 14 volts. When the DC voltage is above 14 volts, the inverter will automatically turn off. Overcharge protection The inverter will automatically turn off when the input charge is higher than the required amount. Short-circuit protection The inverter will automatically turn off when a short-circuit occurs. Te ...
