Speco O2VB1 Operation & User’s Manual

O2VB1/O2VB1V/O2VT1/O2VT1V Please read this instruction carefully before operating the unit and keep it for further reference ...

1. Electrical safety All installation and operation here should conform to local electrical safety codes. Use a certified/listed 12VDC Class2 power supply only. Please note: Do not connect two power supplying sources to the device at the same time; it may result in device damage! The product must be grounded to reduce the ri ...

All the examination and repair work should be done by qualified personnel. Any unauthorized changes or modifications could void the warranty. Statement This guide is for reference only. Product, manuals and specifications may be modified without prior notice. Speco Technologies reserves the ...

1 Introduction ................................................................................................................................................................................................ 2 2 Web Access and Login ............................................................................................................. ...

5.2.1 Local Video Search .................................................................................................................................................. ...

Please read this manual carefully before operating the unit and retain it for further reference. Should you require any technical assistance, please contact Speco Technologies Technical Support at 1-800-645-5516. Main Features  Built-in PoE (Power over Ethernet)  Integrated IR LEDs ...

The IP camera settings can be accessed via a web browser through the LAN.  Access through IP Scanner Network connection: ① Make sure the PC and IP-Cam are connected on the same local network. The camera is set to DHCP by default and will be assigned an IP address by the DHCP server. Make sure that the local network has a DHCP se ...

The window below will be shown after logging in. The following table describes the icons on the live view interface Icon Description Icon Description Original size of resolution Start/stop local recording Fit (correct scale) Zoom/Focus control (for motorized models) Auto (fill the window) SD card recording indicator Full screen (show video only ...

Icon Description Icon Description Zoom - Zoom + Focus - Focus + One key focus (used when image is out of focus after manual adjustment) ...

Press the “Setup” button to go to the configuration interface. Note: Wherever applicable, click the “Save” button to save the settings. 4.1 System Configuration 4.1.1 System Information In the “System Information” interface, the system information of the device is listed. 4.1.2 Date and Time To set the time and date, go ...