Prorack K421 Assembly And Fitting Instructions
Text of Prorack K421 Assembly And Fitting Instructions
Page 1 of 4
K421 ASSEMBLY AND FITTING
INSTRUCTIONS
Kit Contains
1 x Instructions
4 x Feet Assemblies
4 x Coach Bolts
4 x M6 x 12 mm Capscrews
8 x M5 x 12 mm Capscrews
Remove parts from box & check
Contact your Prorack dealer if any parts are missing or damaged
Items you will require that are not included:
1 x Tape measure
1 x Step Ladder for higher vehicles
Important Note:
Whispbar Through Bar pictured in these instructions, also applicable for Whispbar Fl
Prorack K421 K421 ASSEMBLY AND FITTING INSTRUCTIONS
Page 2 of 4
1.6
•
Repeat 1.1-1.3 for all four legs
•
Store these parts in a safe place. They
are not required for this fitting kit.
•
While holding crossbar, detach foot from leg.
Detach
Parts removed from
each leg
•
Turn the crossbar upside down and use
the M6 x 12 mm capscrews to secure the
feet assembly using the Hex Screwdriver
supplied with the crossbar.
•
Repeat on all for legs
•
Select four feet ass
K421 ASSEMBLY AND FITTING INSTRUCTIONS Page 3 of 4
•
Slide clamp through opening in the leg
(see step 2.1).
•
Ensure that the two pins of the clamp
engage correctly with the holes in the roof
rail.
•
Thread the coach bolt through the clamp
and the leg.
•
Tighten the red plastic knob. Do Not Over
Do Not Over
Do Not Over
Do Not Over
Tighten
Tighten
Tighten
Tighten.
•
Ensure the red plastic knob is in the position
above and refit covers.
•
Repeat
K421 ASSEMBLY AND FITTING INSTRUCTIONS Page 4 of 4
Warning Notes:
•
Use these instruction in conjunction with crossbar instructions
WARNING: Check the Tightness of Screws Regularly
•
Check crossbars feel tight.
2.5
•
Completed roof rack.
2.6