ProLights SUNBAR2500MAX Operation & User’s Manual
Text of ProLights SUNBAR2500MAX Operation & User’s Manual
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the
characteristics stated in this instruction manual at any time and without prior notice.
All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it
REV.001-02/18
• Mount bracket
• User manual
TABLE OF CONTENTS
Safety
General instructions
Warnings and installation precautions
1 Introduction
1. 1 Description
1. 2 Technical specifications
1. 3 Operating elements and connections
2 Installation
2. 1 Mounting
3 Functions and settings
3. 1 Operation
3. 2 Basic
3. 3 Menu structure
3. 4 Linking
3. 5 DMX address
3. 6 DMX mode
3. 7 DMX addressing
3. 8 Ether
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are there-
fore marked with
.
• The unit is supplied with hazardous network voltage (
- 1 - INTRODUCTION
1.1 DESCRIPTION
SUNBAR2500MAX is an exceptionally powerful LED graphic strobe batten, featuring also as static
blinder and flood. SUNBAR2500MAX offers a flexible control of beam coverage through an inter-
changeable lens system, passing from 100° wide to 30° beam increasing the light intensity up to 4 time.
Available in White or Full Colour versions, and designed to deliver simply staggering light levels, this ver-
sat
• Dimmer Curves:4 Different dimming curves available
• Strobe/Shutter:1 - 30 Hz, electronic
• Operating Temperature: -10° ~ +45°
• Selectable PWM: 400~16K Hz
ELECTRICAL
• Power Supply: 100-240V – 50/60Hz
• Power Consumption (at 230V):Full Static: 596 W Strobing 1060 W
• Power Consumption (at 120V):Full Static: 621 W Strobing 1166 W
• Output (at 230V):3 units on a single power line
PHYSICAL
• Cooling: Forced ai
1.3 OPERATING ELEMENTS AND CONNECTIONS
1. LED BAR
2. LOCKING KNOB for the mounting
bracket.
3. MOUNTING BRACKET
4. CONTROL PANEL with TFT display
and 4 button used to access the
control panel functions and
manage them.
5. AIR OPENING
6. DMX OUT (5-pole XLR): 1 =
ground, 2 = DMX-, 3 = DMX+, 4
N/C, 5 N/C.
7. POWER OUT (PowerCON OUT):
power output for connection of
multiple units in series.
8. EtherCON connector Signal IN/
OUT.
9
- 2 - INSTALLATION
2.1 MOUNTING
The SUNBAR2500MAX may be set up on a solid and even surface. By means of the fixing facilities of the
baseplate, the unit can also be mounted upside down to a cross arm. The base plate is shown in fig.3. For
fixing, stable mounting clips are required. According to the figure, the bolts of the brackets are placed into
the openings provided in the base plate and turned clockwise until they lock (to the stop).