ProLights SMARTBATHEX Operation & User’s Manual

Text of ProLights SMARTBATHEX Operation & User’s Manual

All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be

reproduced in any form or by any means for any commercial use. In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteristics stated in this instruction manual at any time and without prior notice. All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

• Power cable

• IR Remote controller • User manual TABLE OF CONTENTS Safety General instructions General instructions Warnings and installation precautions Warnings and installation precautions General information General information 1 Introduction 1. 1 Technical drawing 1. 1 Technical drawing 1. 2 Operating elements and connections 1. 2 Operating elements and connections 2 Installation 2. 1 M

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. SAFETY General instruction • The products referred to in this manual conform to the European Community Directives and are there- fore marked with . • Supply voltage of this product is DC24V; never connect

1.2 OPERATING ELEMENTS AND CONNECTIONS

Fig.2 Bottom panel Side panel 1. MICROPHONE to control the show by the external audio signal. 2. CONTROL PANEL with display and 4 button used to access the control panel functions and manage them. 3. AUTO SYNC/ CLEAR button for WiFi mode 4. CHARGE BATTERY LED 5. Adjustable foot support for tilt regulation 6. ON/OFF SWITCH 7. DMX IN (3-pole XLR): 1 = ground, 2 = DMX -, 3 = D

- 2 - INSTALLATION

2.1 MOUNTING SMARTBATHEX may be set up on a solid and even surface. The unit can also be mounted upside down to a cross arm. For fixing, stable mounting clips are required. The mounting place must be of sufficient stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installation, always comply scrupulously with all the regulations (particularly re- garding safety) currently in

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION Switch on the SMARTBATHEX with the power switch (If the battery charge is very low, connect the sup- plied main cable to a socket (100-240V~/50-60Hz). The unit is ready for operation and can be operated via a DMX controller or it independently performs its show program in succession. After operation, switch off the unit with the power switch. NOTE - The battery life indicators are the 4 small green L

3.4 MENU STRUCTURE

MENU 1 DMX Personality and Starting Address 6 CH ð d1 - d512 Selects DMX personality and DMX starting value 8 CH ð d1 - d512 12 CH ð d1 - d512 2 Static Colors C-- ð C1 - C63 Selects 1 of 63 static colors 3 Auto Programs P-- ð P1 - P4 Selects 1 of 4 auto programs 4 Programs Speed S-- ð S1 - S100 Sets auto program speed (slow to fast) 5 Sound Active Snd Selects Sound Active mode 6 Sound Sensitivity SenS ð u0 - u100 Set

ProLights DJ Equipment Owners Instructions: