Projecta INTELLI JAY PM100-BTJ Manual 

File Specifications

Brand: Projecta
Category: Battery Charger
Model: INTELLI JAY PM100-BTJ (Manual ), prkJ6A/cKO9Lc
File Type: PDF
File Size: —
Pages: 16 pages

Download PDF

Download Projecta INTELLI JAY PM100-BTJ Manual (16 pages)

Read Online:

Read the Projecta INTELLI JAY PM100-BTJ Manual  online using the built-in PDF viewer.

Key Pages of Document

12V POWER MANAGEMENT SYSTEM

P/No. PM100-BTJ PM100J Transformer Unit WSM-3 Water Sensor Module PMBTJ-02 Bluetooth Node Phone App Need technical help? Contact Projecta on 1800 294 294 INTELLI ...

IMPORTANT SAFETY INFORMATION

Please read this manual thoroughly before use and store in a safe place for future reference. WARNINGS • Explosive gases. Prevent flames and sparks. Provide adequate ventilation during charging • Before charging, read the instructions • For indoor use. Do not expose to rain • For charging Lead Acid and LiFePO4 batte ...

1. SYSTEM INTRODUCTION PM100-BTJ

4 1.1 Features 4 1.2 Battery charger of house battery 5 1.3 Battery low voltage protection 5 1.4 Voltage charging relay (VCR) 5 1.5 Specification 6 2. STRUCTURE 7 3. OPERATION 8 3.1 Configuration 8 3.2 Wiring 8 3.3 LED diagnostic codes 9 3.4 Connecting to a Smart Device (Bluetooth) 10 3.5 Using the PM ...

• Smart battery charger 12V 30A

– Multi-chemistry charging supports lead acid (AGM, GEL, WET) and lithium batteries – High efficiency, max 88% – With Power Factor Correction (PFC) • 35A Power Supply • Battery charging relay 12V 60A – 60A continuously and 100A for 30mins • Battery Low Voltage Protection –  ...

1.2 Battery Charger of House Battery

The charger automatically starts when the power is connected, either from AC mains or generator. With multiple charging stages (soft start, bulk, absorption, float, recycle), PM100J transformer is designed to fully charge the battery quickly when connected to AC power. To guarantee the optimal charging for batteries of ...

Nominal input voltage (V)

240±10%VAC 50/60Hz Power factor 0.95 Input current at full load 2.5A Battery Vehicle battery 12VDC Vehicle battery voltage range 12.8-16VDC House battery 12VDC House battery voltage range 10.5-16VDC Voltage Sensitive Relay Relay specification 12Vdc 60A Continuous, Pea ...

PM100J Transformer Unit

WSM-3 Water Sensor Module PMBTJ-02 Bluetooth Node ...

DC cables must be sized to carry the maximum full load current and not to exceed the

system volt drop requirements. The following cable sizes are recommended. When running wires, if they pass through panels or wall, ensure the wires are protected from damage by sharp edges. The use of additi ...

3.3 LED Diagnostic Codes

No. LED COLOUR STATUS DESCRIPTION 1 Mains Green ON AC input ok OFF AC disconnected 2 Vehicle Battery Green ON VCR connected Slow flashing (flash once every second) The voltage of vehicle battery is normal but the house battery is charged by the AC Quick flashing (flash twice every second) The voltage of vehi ...

3.4 Connecting to a Smart Device (Bluetooth)

1. Go to your smart device’s App Store (iPhone/iPad) or Play Store (Android) and search for the Jayco “IntelliJay PM100-BTJ” app. Download this app to your smart device. 2. Ensure Bluetooth is enabled on your smart device and that permission is granted for the app to use Bluetooth and discover new connec ...

⚠️ Download Safety

The Battery Charger Manual  (16 pages) is completely safe to download (last scan date: 20/05/2026).

Related PDF Instructions for Projecta INTELLI JAY PM100-BTJ: