Sony SRX-R815P Operating Instructions Manual

Before Using This Unit thoroughly, and retain them for future reference. SRX-R815P/SRX-R810P SRX-R815/SRX-R810 LKRA-010 LKRA-011 LKRA-PCAB1 4-725-922-02(1) © 2017 Sony Corporation ...

Please Read This First .............................................. 3 Notations Used in This Guide ................................ 3 Manual Structure ................................................... 3 About License ........................................................ 3 USB HDD and USB Memory Devices That can be Used on INGEST PORT 1/2 of This Unit ........... 3 Recognized Folder Names ..................................... 3 On ...

Notations Used in This Guide In this guide, the SRX-R815/SRX-R810 Digital Cinema Projector is referred to as the “projector,” the XCT-S10 Digital Cinema Server is referred to as the “server,” the LKRA-007 Touch Panel Monitor is referred to as the “touch panel monitor,” and the system consisting of the above is referred to as the “SRX-R815P/SRX-R810P.” Manual Structure The following manuals are provided for the digit ...

to the water temperature. When the water temperature of the chiller has been changed, readjust the CSC settings. For further details, refer to the “Maintenance Manual.” Caution Do not set the water temperature to a temperature 5°C (41°F) or less than that of room temperature. A difference in temperature causes condensation. It may cause a malfunction of the projector, or moisten peripheral ...

The digital cinema dual system consists of the following products. • SRX-R815P/SRX-R810P Digital Cinema Projector Package – SRX-R815/SRX-R810 Digital Cinema Projector (main projector) – XCT-S10 Digital Cinema Server – LKRA-007 Touch Panel Monitor • SRX-R815/SRX-R810 Digital Cinema Projector (sub projector) • LKRA-010 Dual System Accessory Kit: base and conduit kit • LKRA-011 3D filter and holder: 3D pro ...

Functions SRX-R815/SRX-R810 Digital Cinema Projector Front a Lens fixing lever Locks/unlocks the lens. For further details, see “Attaching and Removing the Lens” (page 38). b Lens attachment part Used to attach a separately-sold lens. For further details, see “Attaching and Removing the Lens” (page 38). Rear a Status lights Shows the status of the projector. For further details, see “How to Read the Indicators” (page 41). b EME ...

b Ventilation holes (exhaust) Left side a Ventilation holes (intake) b Ventilation holes (intake)/air filter For details on air filter cleaning, refer to the “Maintenance Manual.” Connector block: Main projector Connector block Integrated Media Block (IMB) LKRA-010 ...

a NETWORK connector (RJ-45 modular jack) Used to connect to the server’s PRJ connector with the supplied LAN cable. b INTER LOCK connector/Remote connector (D- sub 15 pin, female) For further details, refer to the “Installation Manual.” c RS-232C connector (D-sub 9 pin, female) Used to connect to a LKRA-PCAB1. Main projector: Use the supplied connection cable to connect the CTRL2 connector on the LKRA- PCAB1. Sub proj ...

Front a POWER indicator Shows the status of the server’s power. For further details, see “How to Read the Indicators” (page 41). b SYSTEM SW switch Starts up the server. c (HDD) 1/2 indicator Shows the status of the HDD. For further details, see “How to Read the Indicators” (page 41). d Ventilation holes (intake)/air filter For details on air filter cleaning, refer to the “Maintenance Manual.” e INGEST PORT 1/ ...

For connecting to an external device. For further details, refer to the “Installation Manual.” b GPIO 3/4 connector (D-sub 15 pin, female) For connecting to an external device. For further details, refer to the “Installation Manual.” c IMB connector Used to connect to the projector with the supplied PCI express cable. d AUDIO CTRL connector (D-sub 9 pin, male) Used to control audio devices. e Fan Unit ...

The monitor’s position can be adjusted in the up, down, left, and right directions. Bottom a VGA connector (D-sub 15 pin, female) Used to connect to the server’s VGA connector with the supplied VGA cable. For connection instructions, refer to the “Installation Manual.” b RS-232C connector (D-sub 9 pin, female) For service use. c TPC connector Used to connect to the server’s TPC connector ...

(The 3D filters are installed to open to the left and right in the following sample illustration.) a Lock pin Locks the 3D filter holder. b 3D filter holder Holds the 3D filter. c 3D filter For details on using the 3D filter, see “Opening/Closing the 3D Filter” (page 36). ...

For details on how to use the LKRA-PCAB1, see “Calibrating the Screen” (page 37). a Indicator B Indicates the system status of the LKRA-PCAB1. b Indicator A Indicates that the hardware is initializing. c Calibration camera Measures the convergence of the two projectors. d Fixing clamp hole e LCD panel f Touch sensor Operate the LKRA-PCAB1 application by touching the “buttons” that correspond with the fun ...

Connect the DC power cable of the supplied AC adapter here. m CTRL2 connector Use the supplied connection cable to connect this to the RS-232C connector on the main projector. Main Screen a Auditorium number If a computer is being used to control multiple auditoriums via a network, the auditorium numbers will be displayed. Touch the number to display the auditorium selection dialog box, and then select the auditorium to operate. Cautio ...

Displays the status of the device being controlled by the server. When you tap the button, the “Error History” screen appears. For details on the “Error History” screen, refer to the “Maintenance Manual.” Error: An error has occurred. (screening stops) Warning: A non-fatal problem or error has occurred. (screening continues) Normal: The status is normal. l Login user name Displays the login user name. m (Power) button ...

Startup When starting up the projection system, turn on the projectors’ main power first, and then start up the server and log in to the system. Turning on the Main Power on the Projectors Lower the power switch at the rear of each projector to the on position (|) to turn on both projectors. The power will turn on and the MAIN indicator and LIGHT indicator will turn solid red when the projectors enter standby mode. Starting up the Serve ...

be displayed. Proceed to “Starting the Projectors” (page 18). To change your login password As a user, you can change your own password. 1 Tap the area where the user name is displayed at the top right of the screen to display the “Login” screen, and tap [Change Password]. A screen for changing your password will be displayed. 2 Enter the old password and new password, an ...

Caution The projector is not lit if a chiller is not working in a prescribed condition. Start a chiller in advance. When using a Sony-recommended chiller that is communicating with the projector, set the chiller to standby. 1 In the “Status” screen, tap [Standby]. The “Projector Light Control” dialog box will be displayed. 2 Tap [Power ON]. The MAIN indicators on the rear of the projectors will turn solid green, and the L ...

System 1 Tap on the upper right of the screen. 2 Select [Shutdown], and then tap [OK]. 3 Tap [OK] when the confirmation screen appears. The projection system will shut down. The MAIN indicators and LIGHT indicators on the rear of the projectors will turn to blinking green while cooling. Once cooling is complete, the LIGHT indicators will turn to solid red. Leave the system as it is at this point. 4 Once the MAIN and LIGHT indicators t ...

The sequence of operations from receiving distributed DCP to screening operations are shown below. r r r r r When screening via manual operations When using a screening schedule Selecting the Projector to be Controlled Before performing a control operation, select the target projector. 1 Tap the projector selection button at the top right of the screen. The “Select Control Projector” dialog box will be displayed. 2 ...