Ponpe 7752 Operation Manual

Text of Ponpe 7752 Operation Manual

Triple displays of

level, temp. and humidity (7755/77535). s asy calibration humidity PC connect CO2 Stable NDIR sensor for CO detection. 2 Statistics of weighted average TWA (8 hours weighted average) STEL(15 minutes weighted average) Backlight for working in dark area. Audile CO warning alarm. 2 Battery and adaptor power supply.

4pcs AA batteries

Operation manual Hard carrying case This package contains: Optional accessory: 33% calibration salt (VZ0033AZ1) 75% calibration salt (VZ0075AZ1) RS232 cable and software Adaptor (9V/100~240Vac) POWER SUPPLY The meter is powered by either 4 AA batteries or a DC adaptor(9V/1A output). O CO2 7752/77532 % O CO2 7755/7753

TWA Time weighted average(

STEL hort-term exposure limit (15 minutes weighted MIN/MAX Minimum/Maximun readings Low battery indicator DP Dew point temp.(7755,77535) AIR Air temperature WBT Wet bulb temp.(7755,77535) % Unit of relative humidit

Press to turn the meter on and off.

When power on, it emits a short beep and performs 30 sec countdown(Fig.2) for meter warm up, then enters normal mode with current CO , temp., and 2 humidity(7755/77535) readings displayed (Fig.3). SET % O CO2 Fig. 2 Fig 3 Model 7752/77532 Model 7755/77535 DP/WBT % O CO2 % O CO2 Fig.4 Fig.5 TAKING MEASUR

Press to freeze the readings,

"HOLD" icon is displayed on the left top of LCD(Fig.6). All current readings are kept unchanged, except STEL and TWA. Press again to cancel the hold function. % O HOLD CO2 Fig.6 In MIN and MAX modes, it shows the minimum and maximum readings of CO on the upper LCD and of AIRor Dpor 2 WB temp. and humi

Ponpe Measuring Instruments Owners Instructions: