Playcraft 1233 Installation Instructions
Text of Playcraft 1233 Installation Instructions
IMPORTANT NOTES: Read First
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
DISC CLIMBER
INSTALLATION INSTRUCTIONS
Rev B
11/13/2014
1233
Page 1 of 5
NOTE: 5 Step Disc Climber shown.
Other configurations will vary slightly,
but does not affect assembly.
Public Playground Safety, Publication #325 at www.cpsc.gov for the surfacing appropriate for the fall height of
the
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
DISC CLIMBER
INSTALLATION INSTRUCTIONS
Rev B
11/13/2014
1233
Page 2 of 5
safety surfacing. See Section 06.1 of the
Footing Detail
Installation Manual.
Step 1
Dig (1) Ø 24" footing hole. Refer to Footing Detail
for depth and details.
IMPORTANT: For areas with soft soil conditions,
larger footings may be required.
* Fo
For Customer Service Call 800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
DISC CLIMBER
INSTALLATION INSTRUCTIONS
Rev B
11/13/2014
1233
Page 3 of 5
Step 3 (Factory Assembled)
Attach Disc Climber Cap to top Disc Climber Disc
as shown in Figure 3. (See Note A)
Step 2 (Factory Assembled)
Attach Dome Post Cap to Disc Climber Post as shown
in Figure 2.
Step 4 (Factory Assembled)
Starting with the
For Customer Service Call 800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
DISC CLIMBER
INSTALLATION INSTRUCTIONS
Rev B
11/13/2014
1233
Page 4 of 5
Post as shown in Figure 1.2.
Detail. Secure Disc Climber Disc(s) to Disc Climber
Disc Climber Disc and position as shown in Footing
Refer to Top View for orientation of handles to top
(Factory Assembled)
Step 6
Step 7
Install Anchor Pin to Disc C
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
DISC CLIMBER
INSTALLATION INSTRUCTIONS
Rev B
11/13/2014
1233
Page 5 of 5
Part #
DESCRIPTION
QTY
9123231
Bolt Hex 3/8" x 5-1/2"
1
9483602
Nut Hex 3/8"
1
DISC CLIMBER CAP:
Shall be made from high density 3/4" sheet plastic
specially formulated for optimum UV protection and
color retention.
DISC CLIMBER DISC:
Shall be con