Phytec phyCORE-AT91M55800A Quick Start Instructions

phyCORE- AT91M55800A QuickStart Instructions Using Keil's ULINK and the Keil ARM7/µVision3 Software Development Tool Chain Note: The PHYTEC Spectrum CD includes the electronic version of the English phyCORE-AT91M55800A Hardware Manual Edition: July 2005 ...

In this manual are descriptions for copyrighted products that are not explicitly indicated as such. The absence of the trademark () and copyright () symbols does not imply that a product is not protected. Additionally, registered patents and trademarks are similar ...

1 Introduction to the Rapid Development Kit .....................................1 1.1 Rapid Development Kit Documentation ......................................1 1.2 Overview of this QuickStart Instruction.......................................2 1.3 System Requirements .................................. ...

Index of Figures Figure 1: Default Jumper Settings of the phyCORE Development Board HD200 with phyCORE-AT91M55800A........................15 Figure 2: JTAG Connector X2 on the phyCORE-AT91M55800A (Bottom View)............................................................. ...

1 1 Introduction to the Rapid Development Kit This QuickStart provides: • general information on the PHYTEC phyCORE-AT91M55800A Single Board Computer (SBC), • an overview of Keil's ARM7/µVision3 software development tool chain evaluation version, and • instructions on how to run example progra ...

1.2 Overview of this QuickStart Instruction This QuickStart Instruction gives a general "Rapid Development Kit" description, as well as software installation hints and three example programs enabling quick out-of-the box start-up of the phyCORE-AT91M55800A in conjunct ...

3 1.3 System Requirements Use of this "Rapid Development Kit" requires: • the PHYTEC phyCORE-AT91M55800A • the phyCORE Development Board HD200 with the included DB-9 serial cable and AC adapter supplying 5 VDC /min. 500 mA • the Keil ULINK JTAG-USB adapter, not included in the standard Rapid De ...

1.4 The PHYTEC phyCORE-AT91M55800A The phyCORE-AT91M55800A represents an affordable yet highly functional Single Board Computer (SBC) solution in sub-miniature dimensions (60 x 53 mm). The standard module is populated with an Atmel AT91M55800A controller. All applicab ...

5 The phyCORE-AT91M55800A offers the following features: • subminiature Single Board Computer (60 x 53 mm) achieved through modern SMD technology • populated with the Atmel AT91M55800A microcontroller (BGA- 176 package) • improved interference safety achieved through multi-layer PCB technology ...

The phyCORE Development Board HD200, in EURO-card dimensions (160 x 100 mm) is fully equipped with all mechanical and electrical components necessary for the speedy and secure insertion and subsequent programming of most PHYTEC phyCORE high- density series Single Boar ...