Phytec PCAN-Dongle PK-001 Quick Start Instructions

PCAN-Dongle QuickStart Instructions Using PEAK CANview for Windows Software Preliminary Version Edition: November 2000 ...

 PHYTEC America 2000 L-US001_1 In this manual are descriptions for copyrighted products that are not explicitly indicated as such. The absence of the trademark () and copyright () symbols does not infer that a product is not protected. Additionally, registered patents and trademarks are similarly not expressly ...

Table of Contents 1 Introduction .........................................................................................1 1.1 Technical Highlights.....................................................................1 1.2 View of the PCAN-Dongle...........................................................2 1.3 Sy ...

1 1 Introduction The PCAN-Dongle attaches to the the parallel port of an IBM- compatible desktop or laptop PC, enabling connectivity of the PC into a CAN network without opening the computer to install a CAN net- working insert card. The Dongle houses a Philips SJA1000 CAN controller and a Philips 82C250 CAN ...

2  PHYTEC America 2000 L-US001_1 • Allows hardware reset of the SJA1000 from software commands • Power supplied via the keyboard port with either a PS/2 or DIN connection, or through a PS/2 mouse connection with a pass through for the keyboard connection 1.2 View of the PCAN-Dongle Figure 1: View of the PCAN-Don ...

3 1.4 Overview of this Manual This manual provides: 1) Step-by-step instuctions to setup the PCAN-Dongle with your computer 2) Description of, and installation hints for, the PCANView for Windows software 3) An example showing connectivity of a PC to a CAN network using the PCAN-Dongle and a PHYTEC phyCORE ...

5 2 Getting Started The PCAN-Dongle can be used with any CAN network and is for ge- neral use. This example covers the PHYTEC phyCORE-591 Rapid Development Kit but can be modified for use with any CAN capable Single Board Computer. What you will learn with this Getting Started example: • How to configur ...

6  PHYTEC America 2000 L-US001_1 2.1 Standard Base Addresses and IRQ Configuration The PCAN-Dongle requires setting of the Interrupts and the Port ad- dress of the parallel interface for start-up. These settings are pre- configured upon delivery. The following table shows the standard Base address and Interrupt (IR ...