Phottix Trafo Assembly Instructions Manual
Text of Phottix Trafo Assembly Instructions Manual
1. Align two 50 cm rods. Slide Camera Mount onto rods and
tighten screws.
2. Push Shoulder Pad onto the rods.
3. Add and tighten counterweight mount behind shoulder
pad.
4. Snap Follow Focus assembly onto rods and tighten screw.
Trafo Assembly Instructions
1
4
3
2
EN
2
5. Insert Crossbar into Crossbar Rods Attachment, slide onto
rails and tighten screws.
6. Place handles onto the end of the crossbar and tighten
screws.
Included Parts
88350
Phottix Trafo Wide-Screen Matte Box x1
88355
Phottix Trafo Follow Focus System x1
88360
Front Handles x2
88361
Crossbar Adapter x1
88362
Top Carrying Handle x1
88363
Cage U Bars x2
88364
Shoulder Pad x1
88365
Camera Mount and Plate x1
88368
LCD Attachment Adapter x1
88369
LCD Attachm
7. Align Mattebox with the front of rods and tighten mounting
screws. Raise or lower the Mattebox as needed.
8. Attach U Bars in front of follow focus and camera mount
and tighten screws.
Trafo Assembly Instructions
EN
7
8
Follow Focus Instructions
1. Attached the metal adapter to the flexible lens ring -
change the size as needed to the lens.
2. Tighten the screw, joining the two halves of the metal
adapter.
3. Mount the camera on the rig.
4. A
9. Attach the top handle to 2 rods and attach to the top of the
U Bars. Attach two side support bars to U Bars. Tighten the
mounting screws.
10. Attach camera to base plate and mount to Trafo rig. Attach
counterweight to counterweight mount.
Trafo Assembly Instructions
9
10
5
1. S c h i e b e n S i e d i e b e i d e n 5 0 c m R o h r e i n d i e
Kamerahalterung und ziehen Sie die Schrauben fest.
2. Stecken Sie nun das Schulter-Pad auf die Enden der beiden
Rohre, sodass die Rohre am Ende 2cm vorstehen.
3. Befestigen Sie die Kontergewicht-Halterung für das
Kontergewicht hinter dem Schulter-Pad.
4. Klipsen Sie das Follow Focus System auf die Rohre. Die
Schraube muss erst später festgezogen we
5. Schieben Sie die Querstange in die Querstangen-Halterung
und montieren Sie dann die Querstange mit Halterung auf
den beiden 50cm Rohren.
6. Platzieren Sie die Handgrie an den Enden der Querstange
und ziehen Sie die Schrauben fest.
Lieferumfang
88350
1x Phottix Trafo Wide-Screen Matte Box
88355
1x Phottix Trafo Follow Focus System
88360
2x Handgrie
88361
1x Adapter für Querstange
88362
1x Haltegri oben
88363
1x Cage U Bars
88364
1x Schulter-Pad
88365
7. Befestigen Sie die Wide-Screen Matte Box vorn an den
beiden 50cm Rohren. Und richten Sie sie wie gewünscht in
der Höhe aus.
8. Montieren Sie die Cage U Bars vor dem Follow Focus
System und hinter der Kamerahalterung und ziehen Sie die
Schrauben fest.
Follow Focus System
1. Stecken Sie ein Ende des gezahnten Objektivrings in den
zweiteiligen Metalladapter. Legen Sie den Objektivring
so um Ihr Objektiv, dass zwischen den beiden Hälften des
Metall
9. Nun schieben Sie 2 Rohre in den oberen Haltegri und
schrauben diesen an den Cage U Bars fest. Schieben Sie 2
weitere Rohre seitlich in die U Bars und schauben Sie diese
fest.
10. Schrauben Sie die Wechselplatte an Ihre Kamera und
platzieren Sie dann die Kamera auf der Kamerahalterung.
Zum Schluss befestigen Sie das 1kg Kontergewicht.
DE
Trafo Montageanleitung
9
10
9