Solinst 102 Instructions

Text of Solinst 102 Instructions

For Mk2 Water Level Meters (Push-Release Cable Connection)

7. Unscrew the two screws holding the circuit board (and leads from light if you have an older style light – see photo below) to the Sonalert (watch for proper connection/polarity). 8. If you have an older style light (see photo below) push the light out of the faceplate. Back of Mk2

14. If you have an older style light (see photo below), thread

the leads of the light assembly through the front of the faceplate and snap the light in place. Back of Mk2 102 Faceplate with Older Style Light Sonalert Sensitivity Switch Light Battery Tray Test Button Push-Release Fittings Back of Mk2 102 Faceplate with New Style Light Leads From Light 15. Pla

102 Replacement Faceplate Assembly

indicating the location of the components (comes with Handle Assembly attached and 3 Phillips screws) Instructions For Mk1 Water Level Meters (Molex Cable Connection) 6. Use the small flat screwdriver to unscrew the small brass screw on the side of the sensitivity knob. Remove the sensitivity knob. Use the pliers to unscr

Solinst Measuring Instruments Owners Instructions: