Datavideo DAC-100 Getting Started

S-VIDEO CABLE 1 AC ADAPTER AC ADAPTER S-VIDEO CABLE (REQUIRES RED & WHITE RCA AUDIO CABLE) RCA VIDEO & AUDIO CABLE FIREWIRE (6 PIN MALE TO 6 PIN MALE) DAC-100 What’s in the Box? GETTING STARTED INSTALLATION GUIDE MANUAL REGISTRATION CARD SUPPORT INFO 2 4 FIREWIRE CABLE 6 PIN MALE TO 6 PIN MALE 1 ...

Input Selector Source Indicator Audio Bit Rate Indicator S-Video Input Composite Video Input Left Audio Input Right Audio Input S-Video Output Composite Video Output Left Audio Output Right Audio Output INPUT SIDE OUTPUT SIDE Dip Switches (Behind the Plastic Cover) AC Adapter Connector Power Switch MEET THE DAC-100 FireWire Input/Outp ...

1. Connect the RCA Video/audio cables from the VCR’s Line output to the input on the DAC-100. 2. Connect the FireWire cable to the DAC-100, connect opposite end to the PC or Mac’s FireWire Port. 3. Power on the DAC-100 and the VCR. 4. Start the Editing Software. (No ...

2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac’s FireWire Port. 3. Power on the DAC-100 and the VCR. 4. Start the Editing Software. (Not Supplied) 5. Press the DAC-100’s Source Button to switch i ...

PUSH PUSH Set to “16 bit” 5 1. Connect the RCA Video/audio cables from the VCR’s Line input to the output on the DAC-100. 2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac’s FireWire Port. 3. Power on the DAC-100 and the VCR. 4. Start the Editing Software. (Not Supplied) 5. Press the ...

2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac’s FireWire Port. 3. Power on the DAC-100 and the VCR. 4. Start the Editing Software. (Not Supplied) 5. Press the DAC-100’s Source Button to switch ...

This setup guide will cover four specific areas: A. Explanation of the DAC-100 Dip Switches B. Configuration of the dip switches C. Diagrams of typical cable connections D. Initial Software configuration A. Explanation of the DAC-100 Dip Switches The DAC-100 has dip switches to customize the converter for yo ...

In this section, we will select the appropriate settings for your particular operating system and 1394/firewire card. Please choose a recommended dip switch setting from below, according to your Computer’s Operating System. ...

Make sure your VCR or Analog source is connected to the front inputs of the DAC-100 (LED’s are on the front of the DAC-100). A 6-pin FireWire cable can be connected to the front or rear of the DAC-100. The opposite end should be connected to your 1394/connector on your computer. If you would like to monitor your vi ...