SmarTrike 820 Assembly Instructions Manual

Text of the manual

LOOK US UP ON YOUTUBE:

www.youtube.com/user/SmartTrikeOfcial UK: 0845 5046410 9:30am – 5:00pm Monday to Friday Not Bank Holidays or weekends. You can also email us: [email protected] for assistance and advice. If you have any assembly issues or are missing a part, please call us for assistance. Our sm

Parts needed to complete this section

B A 1a Insert part A into part B until you hear a "click". CLICK! -2-

Insert part E all the way

through, until the ball meets the retaining head. Insert part D into part C all the way through the hole (as shown) Step 2 Parts needed to complete this section E -a -b D C 2a 2b -3-

Push the apple firmly down to

insert, slightly turn until you hear a "click". Make sure white connector is not visible. Step 3 Parts needed to complete this section -a -b 3a 3b Insert the wheel all the way through the body of the trike until the bolt meets the retaining head. -4-

By using the "Allen"

key (N), remove screw by turning counter clockwise. Take the reclining seat (F), lift bottom seat cover and push the screws through the seat's bottom holes. Screw tip into the most rear facing hole and firmly tighten with the Allen key (N). Step 4 Parts needed to complete this section

Suitable for 10 Months

WARNING: It may be dangerous to leave your child unattended. Use a safety belt as soon as your child can sit unaided. This seat is not suitable for children under 10 months. Any load attached to the handle afects the stability of the product. This product is not suitable for running or skating. With a little force,

Canopy's (H) narrow arch needs to face

towards the rear of the trike. Attach both sides of canopy into grooved holder by sliding downward until secured. Step 6 Parts needed to complete this section

Parts needed to complete this section

N I 7a 7b 7c CLICK! CLICK! 1 2 Attach basket firmly to vertical frame (as shown), use removed screw and turn clockwise until secured. Use the Phillips screwdriver (N) to remove the screw by turning counter clockwise. Push basket (I) firmly onto rear axle until it "clicks" into position (see 1 & 2). -8-

Other Bicycle Manuals