Yuwell Electric-TIM II Technical Instructions
Text of the manual
Registrant/Manufacturer/After-sales Service Unit:
Jiangsu Yuyue Medical Equipment & Supply Co., Ltd.
Registered/Production Address: Yunyang Industrial Park, Danyang
Tel.: 0511-86900833
Fax: 0511-86900878
Revision Date: October, 2017
530800-1A
Electric Wheelchair
Product Operation and
Technical Instructions
Please carefully read thes
2. Safety Overview...........................................................01
3. Product Characteristics................................................03
4. Description of Symbols.................................................05
5. Unpacking and Installation............
Refer to Figure 1 for the product's structural diagram
This company's electric wheelchair is suitable for the disabled with
difficulties walking and the elderly and infirm.
3. Product Characteristics
Do not turn or steer on an incline.
T
(3). Structural characteristics
Motor: energy-saving and efficient.
Frame: easy to assemble and disassemble, foldable.
Intelligent controllers: power button, power display, universal joystick,
horn.
Electromagnetic braking system: safe and reliable.
Anti-roll device.
Battery: fully-sealed, maintenance-free.
Two modes of operation: automatic electric drive mo
Take the electric wheelchair out of the box. Lift up the folded backrest,
press down on the seat back tubes at both sides, open the electric
wheelchair until the seat cushion and back cushion are fully
expanded. Refer to Figure 3, Figure 4, Figure 5 and Figure 6.
5. Unpacking and Installation
Use of the backrest folding mechanism:
hold the handle with both h
6. Directions For Use
Adjustment of pedal height: loosen the
set screws on the fastener with a
hexagon wrench, adjust the pedal to the
appropriate height according to the
height of the occupant and lock the set
bolts, see Figure 9.
Installation and removal of anti-roll
wheel: hold the marble on the anti-roll
wheel with your fingers while installing
and inser
The joystick is mainly used to control the direction and speed of the
wheelchair. The direction the joystick is pushed is the same as the
direction of the wheelchair. The farther the joystick is pushed away
from the center, the faster the wheelchair will move. The wheelchair
will automatically brake when the joystick is released; when the
wheelchair
(4). Steps for normal driving
Turn on the battery switch on the battery box and press "I" to switch it
into normal operating condition, see Figure 16.
Pull the clutch joystick of the two motors or the handle from the
"Manual" to "Electric" position.
Do not switch the clutch joystick on an incline. When switching
on a level road, it is recommended to rotate t
7. Daily Maintenance and Service
Note
Before servicing, press the power switch on the battery box to
the "O" state.
It is strongly recommended to have specialized personnel adjust and
replace worn parts or to contact the manufacturer.
Battery
Tire pressure
Wire
Hand brake
Frame
Controller
Motor
Connector
Seat back cushion
Tire
Electromagnetic
brake
Daily
√