Zenith HydroTap G4 Operation & User’s Manual
Read Online
Read the Zenith HydroTap G4 Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
Page 1 of 28 HydroTap G4 User Guide ® • Tap Operation..................(Pages 2-10) • LCD Screen & Menu .......(Pages 11-24) • Maintenance.................... (Pages 24-26) • Home Menu Icons............(Page 27) Date of Installation............./......../......... Affix Model Number Label Here 802266NZ BCS Compact Commercial ...
The safety lock feature is provided to prevent boiling water flowing if the hot lever is inadvertently operated. This function can be activated and deactivated from either the Tap or from the touch screen display (Located on the unit in the cupboard). 3. Tap Safety HydroTap Classic To set the tap safety setting: (Classic; Elite & All- ...
Page 3 of 28 Elite Tap: The Elite tap uses touch sensitive controls, to dispense Boiling, Chilled and Sparkling water. When operating the tap, ensure the touch surface is dry as moisture may interfere with the sensor touch control. The safety lock can be con- trolled from either the tap or from the touch screen display in the same way as the Classic tap (See page 2) Boiling Button Chilled Bu ...
3. Tap functions MixerTap: Lifting the handle up will decrease the flow rate and lowering the handle will increase the flow rate. Raise the handle all the way up to turn the tap off. When the handle is moved towards the BLUE mark, the temperature is decreased and when moved towards the RED mark, the temperature is increased. The final ...
Page 5 of 28 Arc/Cube Tap 3. Tap operation HydroTap Classic and All-In-One taps: Depressing the “Blue” lever allows the dispensing of chilled water. Pulling forward the Blue lever allows the tap to operate in a “no-touch” mode. Water will flow from between 5 and 15 seconds (This is user adjustable). To reset, return the handle to the “Off” position and repeat the step. The le ...
3. Tap operation To dispense Boiling water: (With the safety ON) HydroTap Classic: Depress the Red lever, while simultaneously covering the safety lock button with a second finger. These two actions need to occur simultaneously within 2 seconds for the successful dispensing of boiling water. Elite Tap: Place one finger on the safety l ...
Page 7 of 28 Tap operation HydroTap Classic and All-In-One taps: Depressing both the ‘Red’ and the ‘Blue’ levers allows the dispensing of Sparkling water. Pulling forward both levers allows the tap to operate in a in a “no-touch” mode. Water will flow from between 5 and 15 seconds (This is user adjusta- ble). To reset, return the handles to the “Off” position and repeat the s ...
Tap lights Warning: (All) Flashing warning light: When the indicator light flashes fast and continuous, a system fault has occurred. Check for details on the faults screen. If unable to rectify, call a qualified service agent. Blue Chilled Water Light: (Not available on Elite) On all the time: This indicates that the temperature of the ch ...
Page 9 of 28 Filter light: Classic; Elite & AIO Filter Light Off: This indicates the filter is operating within its normal specified lifespan. Filter Change light flashing slowly: The light will flash slowly when the filter is due for replacement and the LCD will show “Filter Change”. Refer to “Replacing the filter” in section ‘C’ of this document. Filter Lights HydroTap Arc/Cube: ...
Light intensity varies from site to site, therefore it is recommended that a re-calibration be performed at the time of the installation. All direct natural sun light must be shaded from the HydroTap, during the calibration. This can be achieved by closing any nearby curtains, blinds, etc. or by shading the tap with a dark cloth. Safety S ...
Page 11 of 28 Note: When selecting Menu options, the screen will revert to the main menu, if the screen remains inactive for a period, in excess of 10 seconds. Zenith HydroTap introduces a ‘TOUCH’ screen for easy setup and operation adjustment. (See page 23 for Home Menu Icons) Other possible messages in status window: Status** Information Notes Safety OFF Product is in normal operation ...
3LCD Screen Menu Main Menu Sub Menu Sub Menu Options Section Language • English A • Product Info • System Faults • Event Log • Product serial no. • Lists B Information Installation • Filter Flush • Filter Reset • Boiling Calibration • Booster • Lux sensor calibration • Reset options • Calibration options C Servic ...
Page 13 of 28 Language options will be available in some overseas markets A Set Language B System Information In this section, you can find your product serial number , check system fault messages or view the event logs of your product. LCD Screen operation - Section A LCD Screen operation - Section B 1. Press [Product Info] to view the product information. 2. Press [<=] b ...
C Install Have a 10L bucket or similar container (not supplied) at the ready to hold a quantity of water that will be ejected while the Filter Flush Mode is in operation. Open the filter access door on the front of the HydroTap and the filter cartridge will be exposed. Located to the rear RHS of the cartridge is a flush line, ...
Page 15 of 28 1. Press the [MENU] button for main menu. 2. Press the [Install] button. 3. Press the [Filter Reset] button. 4. To set the filter life or edit filter usage, refer to section G- Filter. After replacing the filter, the counters should be reset On start up, the hydroTap starts a self-calibrating program. The controls take the system through the calibration process. Once complete, t ...
5. - CO2 Purge LCD Screen operation - Section C 6. - Lux Sensor Calibration When fitting a new gas bottle, it is important to purge the gas lines. 1. Press the [MENU] button for main menu. 2. Press the [Install] button. 3. Press the [Purge CO2] button. 4. In the next screen, press the [START] button to commence the purging process. 5. Wa ...
Page 17 of 28 E Security The Zenith HydroTap G4 allows the appliance coordinator to set up a pass- word to protect against users changing the preferred system settings. To set a password 1. Press the [MENU] button for main menu. 2. Press the [Security] button. 3. Press [Enable Password} 4. Enter a 4 digit password 3. LCD Screen operation - Section E To change a password 1. P ...
F Communication (when available) The Zenith HydroTap G4 allows the user to use wifi or Bluetooth to operate the product remotely. Not yet available LCD Screen operation - Section F G Settings 3. LCD Screen operation - Section G g Instructions 1. Press the [MENU] button for main menu. 2. Press the [Settings] button. 4. Then enter ...
Page 19 of 28 1. Press the [MENU] button for main menu. 2. Press the [Setting] button. 3. Press the [Date/Time] button. 4. Choose 12 hour mode or 24 hour mode by pressing the square button. The selected mode will be displayed in dark grey colour with a tick box on the right. 5. Press [NEXT] button to set time. G4 HydroTap Set Date/Time Screen Set Date / Time 1. Press the [Setting ...
3. LCD Screen operation - Section G tions To edit the filter life: 1. Press the [MENU] button for main menu. 2. Press the [Setting] button. 3. Press the [Filter] button. 4. Press the [Int / Ext Filter Life] button. 5. To change filter life, first select (Litres) or (Months), then press the up or down arrows to edit filter li ...
