Tyco DSC WK160 Operation & User’s Manual

3 2. INSTALLATION 2.1 Inserting Battery CAUTION! Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to manufacturer's instructions. Figure 1 – Battery Insertion Insert two 1.5V batteries in each slot while ensuring battery polarity. 2.2 Closing Battery Compartment Cover Portable Installation (Using Battery Cover without Tamper Hole) Figure 2 - Battery Cover Mounting (part a) 1 2 ...

as keyproxs, sirens etc.) will stop beeping during the exit delay. Skip exit delay: Stop the exit delay immediately. X-10 (PGM): Activate the appliance controlled by the chosen X-10 unit(s) or the device wired to the PGM output. For more details on configuring the X-10/PGM output functions, see the corresponding sections of the control panel’s Installer Guide (“OUTPUTS” menu) and User Guide (“SCHEDULER” menu). Option settings: Not Used, Status (default); Stop Beeps, Skip exit delay; and X-10 (PGM). * Applicable only to control panels that support the v ...

13 Zone Status Indications To view the zone numbers of enrolled detectors that are in NOT READY ( ) or BYPASSED state ( ), repeatedly press the key. Upon each press of the key, the next zone number appears on the Zone # display (marked "4" in the "Icon and Key Indications" Figure). To view the zone numbers that are assigned to a Partition, press the desired Partition number ( / / ) followed by the key. Upon each press of the key, the next zone number assigned to the pressed Partition number appears on the Zone # display. Notes: A zone which is BYPASSED and N ...

5 Wall Mounting with External Electrical Connector Figure 4b – Wall Mounting with External Electrical Connector 1. Secure bracket with 2 screws as shown in the two drawings above. 2. Attach the unit to the bracket. 3. Secure the unit with the screw ...

1. INTRODUCTION WK160 is a 2-way wireless PowerG touch screen keyprox for the WP8010/30 family control panels. The WK160 enables most common everyday user functions:  Arm and Disarm the alarm system.  Initiate Emergency, Fire and Panic alarms.  Control home automation devices.  Review system status.  Perform programmable predefined functions. WK160 is operated by proximity tags. When authorization is required the user presents a valid proximity tag to the built-in tag reader In addition, the WK160 supports panels featuring Partitions. Partitioning ...

7. LATCHKEY is available only if the LATCHKEY feature is enabled in the WP8010/30 control panel (see WP8010/30 Installer Guide).You can perform the LATCHKEY and INSTANT functions, one after the other. The order is not important.  LATCHKEY and INSTANT functions can be operated only during exit delay.  While in INSTANT / LATCHKEY, the small circle icon on the upper right side of the INSTANT / LATCHKEY icon lights. Notes: 1. Latchkey Arming is supplemental in UL installations. 2. For UL Listed product, Emergency is for ancillary use only. 3.2 Initiating Alar ...