Zavio M510E Quick Installation Manual

Please follow the installation steps below to set up your M510E / M510W IP Camera. Check the package contents against the list below. See P.1 Physical overview. See P.1 Install the hardware and connect all cables. See P.2 Microsoft OS: Use the software CD to install Intelligent IP Installer. See P.3 Access the IP ...

A. Wall mounting and Ceiling mounting A1. Wall mounting Fix the camera and bracket to the wall using two screw and plastic anchors. Fix the camera to the bracket with two supplied screws. A2. Ceiling mounting Fix the camera to the bracket with two supplied screws. Fix the camera and bracket to the ceil using two sc ...

he software CD to install Intelligent IP Installer matically. Please follow those steps to Power on your PC and insert the CD-ROM. The setup page will show up auto install the firmware. Select “Intelligent IP Installer” and follow the installation process to complete the installation. Access the IP Camera using Intelligent IP Install ...

the IP Camera. (Default is admin / admin) 6. Click Install. 4. When accessing the IP Camera for the first time, a yellow information bar appears below the address bar: This website wants to install the following add-on: ‘AxvideoView.cab from ‘Zavio Inc’. 5. Click the information bar, and select Install Ac ...

Mac OS using Safari Browser 1. Select Safari icon 2. Click Bonjour function and select the camera you wish to access. 3. Enter name and password to login to the IP camera. (Default is admin / admin) 4. The monitor image will be displayed in your browser. 5 ...

The default setting of lighting environment is 60Hz. However, if the image appears flickery, this might be because the lighting environment in your country is 50 Hz. Hence, this setting can be changed into 50Hz. Or if you wish to use this IP Camera in an outdoor environment, this setting can be changed into Outdoor mode. Go to � ...

Power the IP Camera and connect an Ethernet network cable to the IP Camera’s LAN port. Using Intelligent IP Installer and entering the camera’s setting page. Please go to “Setting → Basic → System → Network → Wireless”, set the wireless option to “On” 1. Click Refresh and choose the Access Point you wish to ...

8. Click on the small camera icon. Then, choose “View a new contact's webcam”. Camera at home says: 9. The IP Camera automatically accepts your invitation and its live video is displayed. 10. Click Action button and choose Start control pa ...

a. Internet connectivity of the IP camera can be established by inputting the cameras IP information within the Information section. (Please go to Setting → Basic → Network→ Information) b. Internet Connectivity of the IP Camera can be established through PPPoE (Point-to-Point Protocol over the Ethernet) by inputting the username ...

The IP camera is automatically detected and added to “My Network Places” on your computer. Please note that only Home Routers manufactured after 2006 support the UPnP function. c1. If your router is a UPnP Internet Gateway Device (IGD), ...