dbx DDP Operator's Manual
Text of the manual
WARNING FOR YOUR PROTECTION
PLEASE READ THE FOLLOWING:
KEEP THESE INSTRUCTIONS
HEED ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
CLEAN ONLY WITH A DAMP CLOTH.
DO NOT BLOCK ANY OF THE VENTILATION OPENINGS.
INSTALL IN ACCORDANCE WITH THE MANUFACTURERS
INSTRUCTIONS.
DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS
RADIATORS, HEAT REGISTERS, STOVES; OR OTHER APPA-
RATUS (IN
U.K. MAINS PLUG WARNING
A molded mains plug that has been cut off
from the cord is unsafe. Discard the mains
plug at a suitable disposal facility.
NEVER
UNDER ANY CIRCUMSTANCES SHOULD YOU
INSERT A DAMAGED OR CUT MAINS PLUG
INTO A 13 AMP POWER SOCKET. Do not use
the mains plug without the fuse cover in place.
Replacement fuse covers can be obtained
from your
English . . . . . . . . . . . . . . . . . . . . . .1
Français . . . . . . . . . . . . . . . . . . . .39
Deutsch . . . . . . . . . . . . . . . . . . . .79
Español . . . . . . . . . . . . . . . . . . .119
ENGLISH
Section 1: Introduction . . . . . . . . . . .2
Unpack . . . . . . . . . . . . . . . . . . . . . . . .2
Quickstart . . . .
Congratulations on your purchase of the dbx DDP Digital Dynamics Processor. For over 25 years dbx has been
the industry leader in dynamics processing. With the introduction of the DDP, we take that same leadership into
the digital domain. We are sure you will find the DDP able to meet all your dynamics control needs.
This manual will
Analog Input and Output Level Controls
These controls adjust the analog audio levels of the DDP at the input and output stages. Note that the analog out-
put level controls do not affect any digital processing or digital output levels. However, the analog outputs still
function while the digital outputs are engage
The following simple illustrations show how audio signal flows through the DDP, and how the LCD display
works. They will help you to understand where the DDP’s metering points are located, as well as identify the var-
ious elements of the LCD display.
yyyyy
yyyyy
4
Section 2: The DDP Tour
Figure 1: DDP Signal Flow
Figure 2: DDP LCD di
The DDP software works on a hierarchal philosophy. Every program number consists of a processing “setup”
which is built from processing elements that make up a “chain”. There are several preset chains which may be
used to produce a desired effect. Once the desired effect is reached, you may rename and save the setup t
The DDP is designed to interface as easily as possible to your system. To that end, it may be used in the insert
path of a console, in a patch bay, or as a group output processor. Figure 4 shows the DDP used in an insert point
of a console. Analog audio connections are made using standard XLR or 1/4” TRS cables. The rear panel is
marked