Sharp PN -HY431 Dismantle Instruction

Text of Sharp PN -HY431 Dismantle Instruction

PN-HY431 Dismantle Instruction

2 Table of contents 1. Scope.................................................................................................................. 3 2. Tools for dismantling ............................................................................................... 3 3. Dismantle Procedure .............................................................................................. 3 4. Back covers ..........................

PN-HY431 Dismantle Instruction

3 1. Scope This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU. 2. Tools for dismantling Below tools are required to dismantle this product. - Screw Driver - Nipper 3. Dismantle Procedure This product can be dismantled by below steps. 1. Remove Back covers (section 4) 2. Remove Printed circuit boards (section 5) 3. Remove Battery (section 6) 4. Dismantle LCD (section 7) 5. Remove Ele

PN-HY431 Dismantle Instruction

5 5. Printed circuit boards All PWBs can be removed by screw driver. Main I/F PWB (1pcs) Power PWB (1pcs) T-CON PWB (1pcs) 6. Battery This model uses only AAA battery for remote control. Battery can easily be removed.

PN-HY431 Dismantle Instruction

6 7. LCD Module - LCD Dismantle procedure 1. Remove Rear cover 2. Remove PWBs 3. Remove the Cables LCD

Sharp Monitor Owners Instructions: