Philips L01.1A Service Manual

Printed in the Netherlands Subject to modification EN 3122 785 12730 ©Copyright 2002 Philips Consumer Electronics B.V. Eindhoven, The Netherlands. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying ...

EN 2 L01.1A 1. 1. Technical Specifications, Connections and Chassis Overview Index: 1. Technical Specifications. 2. Connections. 3. Chassis Overview. Note: • Described specifications are valid for the whole product range (see Product Survey for specific models). • Figures can deviate slightly fro ...

EN 3 L01.1A 1. Audio / Video In 1 - Video CVBS (1 Vpp / 75 Ω)
 2 - Audio L (0.2 Vrms / 10 kΩ)
 3 - Audio R (0.2 Vrms / 10 kΩ)
 4 - Headphone (3.5 mm) 8 - 600 Ω / 4 mW  1.2.2 Rear Connections Figure 1-2 .eps Monitor Out 1 - Video CVBS (1 Vpp / 75 Ω)  2 - Audio L (0.5 Vrms / 1 kΩ) ...

EN 4 L01.1A 2. 2. Safety & Maintenance Instructions, Warnings, and Notes 2.1 Safety Instructions For Repairs Safety regulations require that during a repair: • Due to the ‘hot’ parts of this chassis, the set must be connected to the AC power via an isolation transformer. • Safety components, indi ...

EN 5 L01.1A 3. 3. Directions for Use 6 You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO and VIDEO INPUT sockets on the rear of the TV. – Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and VIDEO OUT sockets on the VCR. The S-Video connection on the rear of the TV i ...

EN 6 L01.1A 3. 8 & Power button – Switch set off temporarily to standby mode. (The red light indicator lights up when the set is on standby mode). – To switch on set from standby mode, press Channel +/– , Digit (0 -9) or Power button. é Teletext Colour/Personal Zapping buttons – In teletext mode, the colour buttons allow you to a ...

EN 7 L01.1A 3. 10 & Mains Power button Switch mains power on or off. é Standby light indicator Indicate red light when standby mode is activated. “ Remote Sensor Acts as a sensor for activating the controls of the TV when remote control handset is aimed at it. ‘ Headphone socket Connect headphone jack to socket for personal listening. ...

EN 8 L01.1A 3. 12 AUTOMATIC TUNING OF CHANNELS Automatic tuning of channels allows you to store each programme automatically. Enter main menu. Press button repeatedly until Install is selected. Enter install menu. Select Auto Store. Start automatic tuning of channels. When tuning is completed, exit menu from screen. ¸ Main o ✔Picture π ...

EN 9 L01.1A 3. 14 CHANNELS MANUAL TUNING OF CHANNELS ¸ Manual Store o I Colour System I Sound System I Search ✔Channel No. 2 π I Fine Tune I Store œ Manual Storeo I System I Search I Channel No. I Fine Tune ✔Store Store?π œ ˙ ¸ 9 10 11 Manual Storeo I System I Search I Channel No. I Fine Tune ✔Store Stored œ 12 ˙ Start manua ...

EN 10 L01.1A 3. 16 FINE TUNING OF CHANNELS This feature allows you to adjust picture reception in areas of weak reception. Enter main menu. Press button repeatedly until Install is selected. Enter install menu. Press button repeatedly until Manual Store is selected. Enter manual store menu. Press button repeatedly until Fine Tune is sele ...