Vitek VTC-TNB36R3V2 Quick Start Manual

WDR IP IR Bullet Cameras QUICK START GUIDE FEATURES • 1/3” Megapixel Progressive Scan CMOS image sensor • Up to 30fps live view • 3.3~12mm Varifocal Lens (VTC-TNB36R3V2) / 3.6mm Fixed Iris Lens, 2.8mm Also Available (VTC-TNB42R3F2 & VTC- TNB42R4F2) • 36 Infrar ...

Overview This camera series supports both fixed and varifocal lenses. Please note that the zoom and focus features mentioned below are only available on the varifocal lens version. *VTC-TNB36R3V2 Only 7 8 9 1 2 3 4 5 ...

connect the cameras ethernet adaptor. If not powering the camera with PoE, also connect the power Cable to an approved 12VDC Power Supply. Network Cable Weather Resistant Network Coupler 1. Loosen the nut from the Weather Resistant Network Coupler, 2. Run ethernet cable thr ...

strong enough to withstand 3 times the weight of the camera. The mounting steps are as follows: 1. Attach the drill template to the place where you want to install the camera, then drill 3 screw holes and 1 cable hole (if you want to route the cables through the mounting base ...

tighten the mount lock to secure the viewing angle adjustments. 4. To adjust the lens, start by removing the Lens Cover, then adjust the Focus and Zoom levers to achieve a clear image. Replace the Lens Cover. *VTC-TNB36R3V2 Only. 5. Carefully remove the protective film fr ...

IP-Tool or directly in a web browser. 1. Attach the drill template to the place where you want to install the camera, then drill 3 screw holes and 1 cable hole (if you want to route the cables through the mounting base) according to the drill template Accessing the Camera Us ...

browser to connect IP-CAM . IE browser will download the Active X control automatically. After downloading, a login window will pop up as shown below: Input the user name and password to log in. Default user name: admin / Default password: 123456. Directly Access Through a Web Browser ...

confirm. The IE browser will download Active X control automatical- ly. 3. After downloading Active X control, the login dialog box will pop up. 4. Input the default username and password and then enter to view. WAN Configuration Access the camera by the router or virtual server for example ...