Zenith HDV420 Installation And Operating Manual, Warranty
Text of Zenith HDV420 Installation And Operating Manual, Warranty
© Copyright 2002, Zenith Electronics Corporation
Installation and Operating Guide | Warranty
Model Number | HDV420 | High Definition Television Receiver
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions. - All these safety and oper-
ating instructions should be read before the product is
operated.
2. Keep these instructions. - The safety, operating and
use instructions should be retained for future refer-
ence.
3. Heed all warnings. - All warnings on the product and
in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use
instructions sho
Table of Contents
Introduction
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2
SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . 3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control Sensor
Receives signals from the remote control.
Status Indicators
Shows HDTV Receiver status: Current power, and
display output format.
EXIT
Clears all on-screen displays and returns
to normal viewing from any menu.
SELECT
If the main menu is displayed, pressing the Select button
will activate the selected MENU item. If the Select button
is pressed while you are in normal viewing, the information
banner will be di
Remote Control Operation Range
Point the remote control at the remote sensor and press
the buttons.
Distance: About 23 ft (7 m) from the front of the
remote sensor.
Angle: About 30° in each direction of the front of the
remote sensor.
Remote control battery installation
Detach the battery cover on the rear of the remote con-
trol, and insert two R03 (size AA) batteries with
and
aligned correctly.
Caution
Do not mix old and new batteri
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
AC Power Cord
Plug into the power source.
ANT LOOP OUT
Connects to TV ANT IN jack. Provides an RF connection between the
HDTV Receiver and the TV. Provides the signal of ANT IN jack to TV.
OUTPUT SELECTION
Select either YPbPr or RGB depending on how you connect the HDTV Receiver
to the TV.
OPTICAL (Digital au
High Definition Television Receiver
The HDTV Receiver is capable of receiving signals from the cable, and/or
over-the-air antenna and sending the decoder signals to your TV.
Audio/Video Jacks and Cables
The Audio/Video jacks provide excellent picture and sound quality. They are
used for making most Audio/Video connections between components. The
Audio/Video jacks may be color coded (yellow for video, red for right audio,
and white for left audi
Connecting to an Antenna
Before connecting an antenna
Dear consumer purchaser of Zenith High Definition Television Receiver HDV420.
In addition to the components and accessories supplied with your Zenith HDTV Receiver, we have included a small
device called a “10 dB Attenuator”. During initial installation and setup of your Zenith HDTV Receiver, you may need
to install the 10 dB attenuator to the Antenna input “ANT IN” on
Display Formats Overview
The HDTV Tuner offers various display formats and multiple video outputs. When the HDTV Tuner is connected to
A/V systems, the HDTV Tuner can provide video signal formats 1080i, 720p, 480p, or 480i.
1080i, 720p and 480p modes are available for component video (YPbPr) and monitor outputs.
480i mode is available for VIDEO and S-VIDEO outputs.
The HDTV Tuner has two digital audio outputs; Dolby Digital 5.1 a