TP-Link SafeStream TL-R600VPN Configuration Manual

Configuring Network VLAN Configuration 7 VLAN Configuration The router supports 802.1Q VLAN, which can divide a LAN into multiple logical LANs. Each logical LAN is a VLAN. Hosts in the same VLAN can communicate with each other. However, hosts in different VLANs cannot communicate directly. Therefore, broadcast packets can be limited to within the VLAN. 7.1 Creating a VLAN Choose the menu Network > VLAN > VLAN to load the following page. Figure 7-1 Creating a VLAN Create a VLAN and add the port(s) to the VLAN, then click OK. VLAN ID Enter a VLAN ID. The value ranges ...

Configuring Network IPv6 Configuration Choose the menu Network > IPv6 > WAN to load the following page.  Configuring the Dynamic IP (SLAAC/DHCPv6) Figure 8-2 Configuring the Dynamic IP (SLAAC/DHCPv6) Follow these steps to configure Dynamic IP connection: 1) In the General section, check the box to enable IPv6 function, then click Save. IPv6 Check the box to enable IPv6 function. 2) In the Internet section, choose the Internet Connection type as Dynamic IP (SLAAC/ DHCPv6), and configure the corresponding parameters. Then click Save. Internet Connection Type Choo ...

 Configuring the BigPond Cable Choose the menu Network > WAN > WAN to load the following page. Figure 2-7 Configuring the BigPond Cable In Connection Configuration section, select the connection type as BigPond Cable. Enter the corresponding parameters and click Save. Connection Type Choose the connection type as BigPond if your ISP provides you with a BigPond account. Username Enter the BigPond username provided by your ISP. Password Enter the BigPond password provided by your ISP. Connection Mode Choose the connection mode, ...

Configuring VPN IPSec VPN Configuration Local ID When the Local ID Type is configured as NAME, enter a name for the local device as the ID in IKE negotiation. Remote ID Type Specify the remote ID type for IKE negotiation. IP Address: Use an IP address as the ID in IKE negotiation. It is the default type. NAME: Use a name as the ID in IKE negotiation. It refers to FQDN (Fully Qualified Domain Name). Remote ID When the Remote ID Type is configured as NAME, enter a name of the remote peer as the ID in IKE negotiation . SA Lifetime Specify ISAKMP SA (Security Association ...

Configuring Network IPv6 Configuration 3) (Optional) In Internet section, click Advanced to configure the DNS server. Then click Save. Use the following DNS Server Check the box to manually enter the IP address DNS server provided by your ISP. Note: If this option is not enabled, the router will use the default DNS servers with the IPv6 address as 2001:4860:4860::8888 and 2001:4860:4860::8844. Primary DNS/ Secondary DNS Enter the IPv6 address of the DNS server provided by your ISP.  Configuring the Pass-Through (Bridge) In Pass-Through (Bridge) mode, the router wo ...

Supported Authentication Server.................................................................................................................................158 Guest Resources................................................... ...

3 UPnP Configuration Choose the menu Service > UPnP to load the following page. Figure 3-1 Configure UPnP Function Follow these steps to configure UPnP function: 1) In the General section, enable the UPnP function and select the interface. Then click Save. Enable UPnP Check the box to enable the UPnP function. Interface Select the interface for the UPnP function. 2) (Optional) In the UPnP Portmap List section, view the portmap list. Description Displays the description of the application using UPnP protocol. Protocol Displays ...

System Tools Admin Setup 2 Admin Setup In Admin Setup module, you can configure the following features:  Admin Setup  Remote Management  System Settings 2.1 Admin Setup Choose the menu System Tools > Admin Setup > Admin Setup to load the following page. Figure 2-1 Modifying the Admin Account In the Account section, configure the following parameters and click Save to modify the admin account Old Username Enter the old username. Old Password Enter the old password. New Username Enter a new username. New Password Enter a new password. Confirm New Password Re ...