Wickes CGA18GW.3 Manual 

3 8 9 9 10 11 11 13 17 18 18 18 19 COMPONENT LIST GENERAL SAFETY WARNINGS FOR BATTERY CHARGER ACCESSORIES TECHNICAL DATA SYMBOLS NOISE INFORMATION OPERATING INSTRUCTIONS WORKING HINTS FOR YOUR ANGLE GRINDER MAINTENANCE TROUBLESHOOTING ENVIRONMENTAL PROTECTION DECLARATION OF CONFORMITY ...

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. The term “power tool” in the warnings refers to your mains- operated (corded) power tool or battery-operated (cordless) power tool. 1. WORK AREA SAFETY a) Keep work area clean a ...

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repai ...

glasses. As appropriate, wear dust mask, hearing protectors, gloves and workshop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations . The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged ex ...

a) Use only disc types that are recommended for your power tool and the specific guard designed for the selected disc. Discs for which the power tool was not designed cannot be adequately guarded and are unsafe. b) The grinding surface of centre depressed discs must be mounted below the plane of the guard lip. An improperly mounted disc that projects through the plane of the gu ...

a) Do not dismantle, open or shred cells or battery pack. b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from o ...

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given s ...

Hand grip area Battery pack Battery pack release button On/Off switch Disc guard for grinding Charger (ACG118W3) 1 4.0Ah Li-ion battery pack (ABP1840HW) 1 Auxiliary handle 1 Spanner 1 Disc guard for grinding 1 We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name. Choose the type according to the work ...

instruction manual Warning Wear ear protection Wear eye protection Wear dust mask Indoor use only Do not burn Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. Do not dispose of waste batteries as unsorted municipal waste. Read the operator’s manual. Li-ion battery. This product has been marked with a symbol relating to ‘separate collection’ for all ...

Charger Protection class Charging time Charger Input Charger Output Battery capacity Battery Model Charger Model 18V 8800/min 115 mm 22.2 mm M14 1.83 kg /II 2 hrs 100-240V~50/60Hz,55W 20VDC 2.0A 4.0Ah Li-ion battery ABP1840HW ACG118W3 For additional battery technical data, refer to the ra ...

Surface grinding or abrasive cutting off Vibration emission value ah.AG = 4.381m/s² Uncertainty K = 1.5 m/s² The declared vibration total value may be used for comparing one tool with another, and may also be used in a preliminary assessment of exposure. WARNING! The vibration emission value during actual use of the power tool can differ from the declared value depending on th ...

Intended Use The machine is intended for cutting, roughing and brushing metal and stone materials without using water. For cutting metal, a special protection guard for cutting (accessory) must be used. BEFORE PUTTING INTO OPERATION The battery supplied is partially charged. To ensure full capacity of the battery, completely charge the battery in the battery charger ...

will be green. 2) Slide the battery pack into the charger, the light will turn to red to indicate the charging process has started. 3) When charging is completed, the light will turn to green. The pack is now fully charged, unplug the charger and remove the battery pack. WARNING: If the battery pack is warm e.g. after continuous use or after exposure to direct sunlight or heat, ...

must be mounted. Disc Guard for Grinding (7) The coded projection on the disc guard (7) ensures that only a guard that fits the machine type can be mounted. Loosen the clamp adjustment nut (12), if necessary. Place the disc guard with coded projection into the coded groove on the spindle of the machine head and rotate to the required position (working position). Tighten the disc guard (7). The clos ...

Must only be used when changing a disc. Never press when the disc is rotating! Press in the spindle lock button (2) and rotate the spindle by hand until it is locked. Keeping the lock button pressed in, tighten the outer flange (11) with the spanner (9) provided. (See Fig. D3) NOTE: After mounting the grinder tool and before switch on, check that the grinding tool is correctly mounted and that it can be turn freely, make sure that ...

heavy use for prolonged periods of time. Never attempt to exert too much pressure on your angle grinder to speed up your work. The abrasive discs operate more efficiently when light pressure is exerted, thus avoiding a drop in the speed of your angle grinder. If your angle grinder becomes too hot, run it no load for 2-3 min ...

There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the ventilation slots. This is normal and will not damage your power tool. For Batt ...

We, Wickes Building Supplies Limited Declare that this product: CORDLESS ANGLE GRINDER Description and SKU code: 223736 Complies with the following Directives and Regulations: 2006/42/EC, Machinery Directive 2014/30/EU, Electromagnetic Compatibility Directive 2011/65/EU & (EU)2015/863 (RoHS),Restriction of Hazardous Substances Directive 2014/35/EU, Low Voltage Directive and conforms to the following standards: Standards specifi ...