Sealey PC20SD20V Manual 

Text of Sealey PC20SD20V Manual 

CORDLESS VACUUM CLEANER WET & DRY

20LTR 20V - BODY ONLY MODEL NO: PC20SD20V Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH

ASSEMBLY (fig.2, fig.3, fig.4, )

WARNING: Ensure no battery is connected (fig.8). 5.1.1. Undo head assembly clasps and lift off head assembly (fig.3). 5.1.2. Invert tank body and insert push-fit castors. 5.1.3. Place the appropriate filter assembly onto tank body (see sections 6 for wet and dry vacuuming and blowing). 5.1.4. Align up the top section with the clasps and snap into place, by applying pressure at the mid point of th

Replace top section to the body and clip in place using side clips (fig.3).

6.1.5. Connect hose to body and rotate counter-clockwise for a quarter of a turn to lock in place (fig.4). 6.1.6. Assemble required tube and hose arrangement. (fig.1) (fig.4). 6.1.7. Insert the battery, turn unit on. 6.1.8. When you have completed vacuuming, press the switch to ‘Off’. 6.2. EMPTYING DUST BAG 6.2.1. Turn off cleaner and remove battery (fig.8). 6.2.2. Relea

Sealey Vacuum Cleaner Owners Instructions: